FisterD

Just put these on today. Purchased from Ebay. Nice product ( no affiliation,..yada,yada..). The gas pedal is about a 1/4" thick, B & C pedals are about 1/8". Hargett Precision is the guy that makes them.

Scott 1996 993c2

Very nice -- thanks for sharing the pic. I recently installed a set of Rennlilne aluminum pedals -- and could not be happier with the mod.

Scott

kkim

Nicey, nice.

Air Kuul TT

Darrin,

You're getting ready for your next DE huh? Very nice!

Sooner

Those are very nice. I met one of the Hargett guys out at PIR during the American Lemans Weekend in July (Driving a VERY sweet 964 RS, I might add). I am going to pick up a set myself. I am just waiting for the deadpedal, it's supposed to be out in a few months.

FisterD

You Betcha'! I can't wait to get out there again.

Leland Pate

Yup, Mark Hargett makes those. He is a really cool guy and has one badarse 993 clone. If I can find his old webpage, I'll post a link here.

Natchamp

Darin,

Glad I found this thread in a search. Thanks for the kind words. Would you mind if I used your picture of my pedals in your car? They look really nice installed and I've been trying to add some shots for my website.

Mark
HargettPrecision

Sooner

Mark,

What's the ETA on a deadpedal?

pcar964

Does he make them in black? I was thinking about a slightly wider gas pedal (don't see the point to brake and clutch, the rubber items are fine), but I don't want a shiny silver pedal in my black car. I'd rather not be able to see it! I know I saw Rennline used to make a black one...

FisterD

No problem, Mark. Let me know if you need a bigger shot, as I made them smaller for the post.

Natchamp

Thanks Darin, that would be great! Can you email the higher resolution one to mark@hargettprecision.com ? I really appreciate it.

Pcar, I do not offer them in black at this point, haven't really had enough interest to justify. Obviously you could always get it anodized if you prefer that.

Sooner, I'm happy to say the dead pedal is imminent. The design work is done, I have the material and hardware. I should be making some hopefully this weekend.

Mark
HargettPrecision.com

Bull

For another perspective...if you are buying the pedals to help with heel-toe efforts, the brake pedal does make a difference in most cases. With most designs (I use Rennline), the gas pedal mounts on top of the existing pedal, while the rubber gas and clutch pedals are removed prior to mounting the aftermarket pedals. The result is that the gas and brake pedals are moved closer to the same height from the floor, making heel-toe easier without adjusting the pedal cluster. If you do the brake pedal, you will want the clutch to look uniform, I would think.

trojanman

Do I smell a group buy? Mark, would you be hip to that idea?

Natchamp

Hi Jeff,

I'm open to a group buy, you guys figure out what and how many you want.