993 Turbo S Ducts GB *Official Signup Thread*
05-05-2005, 01:15 AM
#63
Drifting
Join Date: Apr 2003
Location: la la land | comin' back soon nyc
Posts: 3,351
Likes: 0
Received 2 Likes
on
2 Posts
alan please put me down for a set as well (will paint black)... if 20 have not yet kicked in... >>> errr... maybe make that #40 on the list? 
ha!
anyway
ha! anyway
Last edited by 24FPS; 05-05-2005 at 01:56 AM.
05-06-2005, 01:24 AM
#65
Nordschleife Master
Originally Posted by gjb
robroy72,
foglight? where?
Thanks,
G-
foglight? where?
Thanks,
G-
Here's a link to a thread showing pics of the Turbo S Ducts being purchased in this group buy: link:https://rennlist.com/forums/993-forum/202021-993-turbo-s-ducts-gb-pics-are-here.html
Scott
05-06-2005, 02:17 AM
#67
Nordschleife Master
Originally Posted by Midnight C4S
Thanks Scott nice pictures, thanks for taking the time to post them for us.
As soon as I get a moment to attempt the install, I'll let you guys know my impressions re: fitment.
Scott
05-10-2005, 07:08 PM
#68
Addict
Rennlist Member
Rennlist Member
Thread Starter
OK... everyone should have recieved a PM from myself with payment instructions. I'm going to send Nick a check for the first 10 tonight or tomorrow. Once checks are in for the first ten, I'll send him money for the second set of 10 and we can sort out the balance at the end by that time we should have checks in from everyone who seriously wants a set.This way, Nick isn't left holding the baby for everything by himself.
Last edited by robroy72; 05-10-2005 at 07:28 PM.
05-10-2005, 07:32 PM
#69
Rennlist Member
Originally Posted by icerbofh
How much are they btw?
https://rennlist.com/forums/showthre...=200262&page=4
Originally Posted by robroy72
Ok
If someone is needed to do the group buy, I will volunteer.
I think it would be easier if I buy the 10 sets from Nick myself, and then sell them individually at , say, $260 shipped. I would do it through my own corporation so I can use the FedEx or UPS account.
Sound OK to everyone? If so, I'll start another thread to list the names out.
Allan
If someone is needed to do the group buy, I will volunteer.
I think it would be easier if I buy the 10 sets from Nick myself, and then sell them individually at , say, $260 shipped. I would do it through my own corporation so I can use the FedEx or UPS account.
Sound OK to everyone? If so, I'll start another thread to list the names out.
Allan
05-11-2005, 11:11 AM
#71
Rennlist Member
Join Date: Apr 2002
Location: Laguna Niguel, CA
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
How do we lose the "bumperettes" ? Does this require a whole different bumper?
https://rennlist.com/forums/showthre...ght=bumperette
https://rennlist.com/forums/showthre...ght=bumperette
Last edited by 911CabSteve; 05-11-2005 at 11:22 AM. Reason: add pic/thread link
05-11-2005, 11:48 AM
#72
Addict
Rennlist Member
Rennlist Member
Thread Starter
Originally Posted by 911CabSteve
How do we lose the "bumperettes" ? Does this require a whole different bumper?
https://rennlist.com/forums/showthre...ght=bumperette
https://rennlist.com/forums/showthre...ght=bumperette
You can keep your bumperettes and install the ducts, if that is what you are asking.
05-11-2005, 11:48 AM
#73
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
I asked Gert a similar question this week. Here is his response:
If you remove the bumperettes, you will have to fill the 2 gaps that are in the bumper and have it repainted.
Afterwards, you need the Euro type turn signals instead of the short US turn signals.
An alternative is to cut off the part of the turn signal that is sitting in front of the bumperette and re-seal with clear silicone.
..............................
I'm not quite sure I follow the alternative he describes, but apparently installing the Euro turn signals on the US bumper will remove the front bumperettes. Please correct me if I'm wrong.
If you remove the bumperettes, you will have to fill the 2 gaps that are in the bumper and have it repainted.
Afterwards, you need the Euro type turn signals instead of the short US turn signals.
An alternative is to cut off the part of the turn signal that is sitting in front of the bumperette and re-seal with clear silicone.
..............................
I'm not quite sure I follow the alternative he describes, but apparently installing the Euro turn signals on the US bumper will remove the front bumperettes. Please correct me if I'm wrong.
05-11-2005, 03:38 PM
#75
Addict
Rennlist Member
Rennlist Member
Originally Posted by Adrienne
..............................
I'm not quite sure I follow the alternative he describes, but apparently installing the Euro turn signals on the US bumper will remove the front bumperettes. Please correct me if I'm wrong.
I'm not quite sure I follow the alternative he describes, but apparently installing the Euro turn signals on the US bumper will remove the front bumperettes. Please correct me if I'm wrong.
Greg H.