motobri

Still trying to figure out how to get the horn working. This is the only part left but no clue where I would mount it?





Anyone?

Or maybe this is what I need?

https://www.fvd.net/us-en/PCG3478350...s-genuine.html

motobri

Still don't have a horn. Anyone have any idea on how to get the horn connected in the hub? Is it possible now that the OEM orange clockspring ring is removed?

orbeamike

Aside from the hub adapter, this should be almost identical install as the RS steering wheel, have you made the following required mods to the harness to turn off the airbag light and activate the horn circuit? You need the L contact, resister soldered to the orange connector, and the yellow horn wire attached to the red connector.

Type911uk

You have one of these fitted?

I suspect not, its not in your pic of parts and is the horn contact!

motobri

Yes, but don't know where to connect the 2 wires and in the hub to? Are they not needed?

Manual991

If you didn't already get your answer, I just took mine apart. There's only 1 wire from the hub to the horn ring. Here's a picture of everything that I removed. The hub on the left is the MOMO hub that I used with an Atiwe adapter. The hub on the right is the Porsche/Atiwe hub came on the steering wheel that I had but I used the MOMO hub. Both only have 1 wire.