Notices
992 2019-Present The Forum for the Non-Turbo 911
Sponsored by:
Sponsored by:

PSE EXHAUST HELP

Thread Tools
 
Search this Thread
 
Old 08-25-2023 | 02:47 AM
  #16  
Nein Eleven's Avatar
Nein Eleven
Racer
 
Joined: Dec 2022
Posts: 470
Likes: 386
From: CA
Default

Originally Posted by PhilH930
Question on PSE. I’m coming from a 718 BGTS 4.0 and can hear the exhaust open when rpms exceed ~3.8K in first, second and third, and slightly lower rpm if fourth or higher.

On the 992 with PSE (mine will be a GTS), anyone know what approx rpm they open with PDK? I’ll be adding the car graphic controller, but just curious.
I’ve read that the valves close between 1K-4K.
Old 08-25-2023 | 09:32 AM
  #17  
Schwarz992C4S's Avatar
Schwarz992C4S
Rennlist Member
 
Joined: Feb 2015
Posts: 365
Likes: 269
From: Marietta, Ga
Default

Originally Posted by Nein Eleven
Wait, is there something special about the PSE button or did you just want to have the proper icon?

Same wrt to the PSE vs quad tips for me. It would have been easier to change the valence and tips in hindsight.
With the original 2 diamond icon switch assy installed and PSE activated, I found only one of the diamond switches could be programmed. Thus, I went for a proper solution. After the switch assy swap out PSE switch works as designed and the diamond is programmable to another feature as desired. It wasn't about the icon, it was because of loss of operability.
Old 08-25-2023 | 06:11 PM
  #18  
Nein Eleven's Avatar
Nein Eleven
Racer
 
Joined: Dec 2022
Posts: 470
Likes: 386
From: CA
Default

Originally Posted by Schwarz992C4S
With the original 2 diamond icon switch assy installed and PSE activated, I found only one of the diamond switches could be programmed. Thus, I went for a proper solution. After the switch assy swap out PSE switch works as designed and the diamond is programmable to another feature as desired. It wasn't about the icon, it was because of loss of operability.
Just to clarify, with the two diamond switches and PSE activated, only one of the switches was programmable and the other switch was dead/didn't control the exhaust valve?
The following users liked this post:
Schwarz992C4S (08-26-2023)
Old 08-26-2023 | 08:43 AM
  #19  
Schwarz992C4S's Avatar
Schwarz992C4S
Rennlist Member
 
Joined: Feb 2015
Posts: 365
Likes: 269
From: Marietta, Ga
Default

Originally Posted by Nein Eleven
Just to clarify, with the two diamond switches and PSE activated, only one of the switches was programmable and the other switch was dead/didn't control the exhaust valve?
Correct.
The following users liked this post:
Nein Eleven (08-26-2023)
Old 08-27-2024 | 11:40 AM
  #20  
JimEb's Avatar
JimEb
Racer
 
Joined: Dec 2021
Posts: 381
Likes: 131
From: WI
Default

Does the exhaust valves really open/close based on throttle despite having PSE off or is OP really hearing the sound symposer on the intake opening up?



Quick Reply: PSE EXHAUST HELP



All times are GMT -3. The time now is 01:47 AM.