When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There is a design flaw around the lower trim of the PDK Shifter. In the standard and aluminum option, there is a gap that allows the accumulation of debris. Also the edge of the metal is unsupported as it moves slightly when pressed.
There are two options offered on the configurator to address this issue; open edge allowing debris to collect Paldeo wood seals all edges and compliments a dark interior
Leather or Wood.
I prefer the Paldeo wood as it compliments the dark interior of my car.
There is a design flaw around the lower trim of the PDK Shifter. In the standard and aluminum option, there is a gap that allows the accumulation of debris. Also the edge of the metal is unsupported as it moves slightly when pressed.
There are two options offered on the configurator to address this issue;
open edge allowing debris to collect Paldeo wood seals all edges and compliments a dark interior
Leather or Wood.
I prefer the Paldeo wood as it compliments the dark interior of my car.
Those photos aren’t apples to apples. Take a zoomed in shot on your paldeo wood...
Every trim has a small gap. It’s actually identical to the piano black trim running along the edges of the center tunnel
The manual transmission guys are probably such neanderthals, they will probably never notice the part in question is the same, no matter what transmission you have.
.
Last edited by Bluehighways; 11-26-2020 at 11:47 PM.
The manual transmission guys are probably such neanderthals, they will probably never notice the part in question is the same, no matter what transmission you have.
.
we’re to busy enjoying actually driving our cars to worry about small things like this.....
11-26-2020, 06:01 PM
Open edges around PDK Shifter
