Frunk Lid Liner
08-03-2020, 09:47 PM
#32
Rennlist Member
Thread Starter
I know this. I just took mine out of my 991 when I traded it in. There were no rattles at all in 40 months of use. It fits snugly so I didn’t get any vibration marks.
The following users liked this post:
MattSheldon (08-03-2020)
08-03-2020, 09:54 PM
#33
Intermediate
08-06-2020, 05:24 AM
#34
Rennlist Member
Awesome, thanks kindly!
For those of you who haven’t installed a lid liner, it is an very easy install, like ten minutes tops. Lid Liner makes a high quality product.
I often pack that frunk and it’s a comfort to know I don’t need to worry about damaging the inside of my hood. I just had five rose bushes in there last week, lol. Anyway, it’s an inexpensive option, and for me, definitely a worthwhile upgrade.
For those of you who haven’t installed a lid liner, it is an very easy install, like ten minutes tops. Lid Liner makes a high quality product.
I often pack that frunk and it’s a comfort to know I don’t need to worry about damaging the inside of my hood. I just had five rose bushes in there last week, lol. Anyway, it’s an inexpensive option, and for me, definitely a worthwhile upgrade.
The following 2 users liked this post by Airbus Raider:
Richard_Wallace (08-11-2020),
russbert (08-13-2020)
08-13-2020, 09:17 AM
#36
Rennlist Member
Thread Starter
Thanks for pushing them a little!
The following users liked this post:
Airbus Raider (08-13-2020)
The following users liked this post:
markchristenson (09-03-2020)
09-03-2020, 08:02 AM
#38
Rennlist Member
Thread Starter
09-03-2020, 06:35 PM
#39
Anyone know if an Igloo Ice Cube 60 qt. cooler will fit in the frunk of a 718 Spyder?
09-06-2020, 08:41 AM
#40
Rennlist Member
Thread Starter
I wrote to LidLiner again just to let them know that interest persists.
The following 2 users liked this post by Dan Nagy:
540gone (09-06-2020),
Schwarz992C4S (09-06-2020)
09-06-2020, 12:38 PM
#41
Just picked her up yesterday, and brought a Rubbermaid cooler for shopping, hoping it would fit. Well there it is. Even the SA was surprised how well it fit in. Doesn’t wiggle at all. I’ll just leave it there.
Last edited by Manoverpdk; 09-06-2020 at 12:39 PM.
09-06-2020, 12:51 PM
#42
Instructor
Just picked her up yesterday, and brought a Rubbermaid cooler for shopping, hoping it would fit. Well there it is. Even the SA was surprised how well it fit in. Doesn’t wiggle at all. I’ll just leave it there.[/QUOTE]
Based on the bumper cover, this looks like either a 991 GT3 or a 981 GT4. Just be aware that the front-back dimension of the frunk in a 992 is ~ 2" shorter (or narrower or whatever) that the previous generation.
Based on the bumper cover, this looks like either a 991 GT3 or a 981 GT4. Just be aware that the front-back dimension of the frunk in a 992 is ~ 2" shorter (or narrower or whatever) that the previous generation.
09-06-2020, 12:56 PM
#43
Actually a 718 Spyder.
09-06-2020, 04:02 PM
#44
Rennlist Member
Thread Starter
FYI - this thread is about the liner for the frunk lid, not the liner.
The following users liked this post:
ryanlsmith (09-07-2020)
09-22-2020, 12:57 PM
#45
Rennlist Member
Thread Starter
I haven't heard back from LidLiner. They have gone silent but I see they are still advertising here. Hopefully they will pick up on this project soon.