When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I cut up pieces of foam with adhesive backing and applied it in small sections around the door. When I swapped from the regular door handles to the GT3 RS door pulls, it created a slight rattle (…usually heard while listening to music with heavy bass) because the door card no longer screwed into the door structure where the door handles used to reside. A few foam pieces in that area remedied that.
Damn...I applied sound proofing/deadening to the doors, swapped out the speakers for a new set and bought a new amp. My driver side door card has been rattling with deeper bass where I had to cross over my 8" midbass subs in the doors to 70hz to eliminate it. Tried this...and can now change it back to 50hz and it only causes audible vibration on the deepest of bass/loud music.
Has been driving me nuts trying to figure it out, think I took the door card off 15 times. So thank you!
Damn...I applied sound proofing/deadening to the doors, swapped out the speakers for a new set and bought a new amp. My driver side door card has been rattling with deeper bass where I had to cross over my 8" midbass subs in the doors to 70hz to eliminate it. Tried this...and can now change it back to 50hz and it only causes audible vibration on the deepest of bass/loud music.
Has been driving me nuts trying to figure it out, think I took the door card off 15 times. So thank you!
We did inner door skin and between speaker and mount. No issues in my install, maybe this helps.
We did inner door skin and between speaker and mount. No issues in my install, maybe this helps.
Is that a Focal? I actually did a ton more sound proofing. It was the upper part of the door card causing the issue. It still vibrates with the deepest of bass tunes, but honestly it's hard to remove that with sub 60/70hz bass sitting in the doors, which is why you ideally have a subwoofer that can handle those frequencies!
I couldn't wrap my head around what would have been some CAD$150-200 to order and ship the part, so used a $14 can of Rustoleum apple red I just happened to have lying around and voila...
The **** looks brighter that the guards red in the picture, but honestly, it's pretty darn close in real life, and zero folks are going to be in the car and say "hey, your **** is a slightly different color of red than your chrono". Figured if I didn't like it, could always either buy a new one or get the one from RGS. But ended up looking great.
Damn finger prints on the gloss black center console though...hmmm...maybe I will swap the magsafe holder and paint it red as well. Didn't like it at first in red.
Edit: For anyone else who is thinking about this, if you're buying from scratch (vs just happened to have a can of red lying around from another project like I did) I think "Satin colonial red" would be a closer match to Gaurds Red FYI....but again, even this apple red is close enough given the different spot and different lighting the steering wheel gets from the clock and dash.
Bought this giant cup holder with phone pocket from Amazon. Added a spacer underneath, made a few modifications and glued/screwed it into the console storage box. Now I can swap between the standard cup holder and this giant one.
Frunk liner. Why does anyone need one you ask? Takeout food & beverages that I refuse to let in the main cabin, transport of fluid household products that might leak, etc.
These are just Weathertech liners but swapped out the Weathertech decal with a Porsche one I had extras of from eBay some years ago for another application.
04-29-2024, 12:20 AM
