When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a set of Brixton Forged R11-R's in 21"x10" and 22"x12.5" in a brushed double-tint satin finish on order which takes approximately 3 months. They actually did a rendering for me to get an idea of what it will look like. I am not highlighting the rims in any exterior color, however.
This guy has the same wheels on his TTS. No full body stills yet.
Next summer...i was planning to go with Vossen EVO-2 (3-piece) in gloss black rather than dark bronze shown here.Give an old school black 930 look.
I love the look of 3-piece (and even 2-piece wheels). However, my luck with 3-piece and the ultra low profile tires has not been good, as I have bent so many on hitting not that big of potholes. For this reason, I only buy monoblocks now, especially since I have dropped my tire pressures a tad for ride comfort.
Forgeline 20x9.5 GE1R C/L +40 & 21x12 GE1R C/L +62 - perfect fit. Steve at Forgeline rocks it. Plus they got my wheels to me 1 week earlier than estimated! $7327 + $245 shipping. Not including tires of course.
Forgeline 20x9.5 GE1R C/L +40 & 21x12 GE1R C/L +62 - perfect fit. Steve at Forgeline rocks it. Plus they got my wheels to me 1 week earlier than estimated! $7327 + $245 shipping. Not including tires of course.
Looks awesome. I may have asked before - is the suspension modified?
I have a set of Brixton Forged R11-R's in 21"x10" and 22"x12.5" in a brushed double-tint satin finish on order which takes approximately 3 months. They actually did a rendering for me to get an idea of what it will look like. I am not highlighting the rims in any exterior color, however.
That rendering looks amazing! How do Brixton's compare quality-wise to HRE's/Anarky? I absolutely love their styles but I don't know anything about their reliability/reputuation...my limited knowledge of aftermarket wheels is that HRE's are among the very best in regards to quality and weight.
Thanks in advance
Last edited by boosted305; 06-29-2021 at 01:43 AM.
That rendering looks amazing! How do Brixton's compare quality-wise to HRE's/Anarky? I absolutely love their styles but I don't know anything about their reliability/reputuation...my limited knowledge of aftermarket wheels is that HRE's are among the very best in regards to quality and weight.
Thanks in advance
I think the quality is great, but there are many great companies with quality forged wheels. I like the really defined lines of the Brixton's. I have a set of R10D's on my E63S which are triple-tint in satin below. I have bought two sets of HRE's as well, the last being for my R8. When I was looking for a new set for the E63S back in 2018, I first looked at HRE but I couldn't find a style that I really really liked. Same thing now with the TTS, so I went with Brixton again.
BTW, my car is not that low. I was just playing around with the lowering module. The Mercedes, you can lower really easily through the OBDII Port.
The next best selling brand after HRE has been ANRKY (which also happens to be made by HRE). The only other brands that compete with them in regards to quality are BBS and Forgeline. Below are two Cab's that we completed recently. The Oak Green Metallic has S3-X1's and the Gentian Blue one has the 1-piece version of the same wheel called the S1-X1.
We work pretty closely with HRE and they’re great! Other great options we considered were from Brixton, Forgeline, Vossen, Rotiform. We decided on HRE 305M wheels for our shop car.
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
I love the look of 3-piece (and even 2-piece wheels). However, my luck with 3-piece and the ultra low profile tires has not been good, as I have bent so many on hitting not that big of potholes. For this reason, I only buy monoblocks now, especially since I have dropped my tire pressures a tad for ride comfort.
Duly noted...not fully committed to 3-piece but would go 20/21....21/22 is asking for trouble in the North
Last edited by Pad Bender; 07-29-2021 at 12:14 AM.
06-28-2021 | 06:43 PM
Is that the Oak Green? Looks great!!
I was just playing around with the lowering module. The Mercedes, you can lower really easily through the OBDII Port.
