StormRune

Ah, okay. Well my original answer was on the right track. The fronts aren't a problem unless you want spacers to fill out the wheel well more.

On the rear, a 10mm spacer will take the inside of the wheel back out to where it belongs while also giving you a 12mm more aggressive offset than stock on the outside. This isn't a problem since many use spacers to get as much as a 15mm offset over stock.

Here is a photo of of my 991.1 C4S with a 12mm increased offset in front (more than most use) and a 13mm increase in rear. The wheels and tires fill out nicely but are still within the wheel wells.

smbryan

whata tease we can't even see the wheels!

StormRune

Me? I was just trying to show the offset... and didn't want to hijack the thread too much more. But since you ask
A couple of days ago I posted quite a few photos of the wheels/car from a variety of angles in another thread here if you are interested: https://rennlist.com/forums/991/9093...l#post14215805

sc8526

SMBRYAN - I've sent you a PM. I'm interested in your technos.