991.1 Changing to Sport Steering Wheel, what is required?
#17
991.2 uses a different airbag. You need to buy a 991.2 airbag if you are going to upgrade. Otherwise, buy a nice 991.1 sport paddle wheel from me! 🤣☺️🤣
#19
#21
I have a '12 C2S MT WITHOUT MF steering wheel and would like to upgrade the steering wheel to a sport design-- which one do you recommend and is this an easy swap ----Is there a step by step anywhere as well
Thanks
Jay
Thanks
Jay
#22
Instructor
Gents, Will this
.2 wheel work with the .1's ?? I have 991.1 MF wheel and looking to upgrade...understand that I will need airbag and programming but what else is needed to make this work
.2 wheel work with the .1's ?? I have 991.1 MF wheel and looking to upgrade...understand that I will need airbag and programming but what else is needed to make this work
#23
Rennlist Member
If anyone is interested in a 991.2 MF wheel I have one that I used in my old Turbo S which has a converter installed for plug and play installation. The entire change out only take a few minutes!
#25
Rennlist Member
#27
Does anyone have a total cost estimate on what it would be to change to a 991.2 multi function wheel?
#30
Rennlist Member
I did the steering wheel swap myself
10 minute job.. no joke
- disconnect battery, wait 30 minutes (even 15 will do)
- Insert screw driver at the bottom of your current steering wheel, air bag will pop out
- Disconnect two plugs behind the air bag
- Use correct tori bit to remove 1 screw holding steering in place. mark position of steering wheel before removing
- Replace with new steering wheel
- connect and insert new airbag
done
I wanted MF AND paddles.. so I went with a 991.2. Total cost was $1700 for parts.. steering, airbag and conversion module so 991.1 car will recognize 991.2 steering and MF button will work normally
P.S MF only works on cars that already have a MF steering wheel. Those with toggle stalk , need to do a lot more "work"
10 minute job.. no joke
- disconnect battery, wait 30 minutes (even 15 will do)
- Insert screw driver at the bottom of your current steering wheel, air bag will pop out
- Disconnect two plugs behind the air bag
- Use correct tori bit to remove 1 screw holding steering in place. mark position of steering wheel before removing
- Replace with new steering wheel
- connect and insert new airbag
done
I wanted MF AND paddles.. so I went with a 991.2. Total cost was $1700 for parts.. steering, airbag and conversion module so 991.1 car will recognize 991.2 steering and MF button will work normally
P.S MF only works on cars that already have a MF steering wheel. Those with toggle stalk , need to do a lot more "work"
The following users liked this post:
titans99 (03-07-2021)