When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nice!
Are the main benefits that it is faster & has auto shut off when it reaches your desired pressure?
yes, absolutely, it’s great to be able to set it and walk away to work on something else. Even to stand a little further back, to save your eardrums from the noise.🙉
Heading on an epic road trip West and finally installed a Uniden R7 Radar Detector using the trick Blendmount hardware. Awesome combination.
Also installed the Rennline Phone mount, one of the easiest mods yet. Should be ready to rock and roll!
Well, you can compare it to a calibrated, certified gauge...
... or you could accept that a variance of 1psi will change absolutely nothing in your life, and opt taking the consistency route instead of the accuracy route by using the same gauge each time.
Heading on an epic road trip West and finally installed a Uniden R7 Radar Detector using the trick Blendmount hardware. Awesome combination.
Also installed the Rennline Phone mount, one of the easiest mods yet. Should be ready to rock and roll!
Best of luck Tom! Enjoy the drive and see you soon.
Well, this is going to date me …..but my first job at age 15 was pumping gas at a “full service” filling station/automotive shop and all a customer had to do was purchase a tank of gas and I would cheerfully check your air in all 4 tires, check your oil, battery water, radiator coolant, ATF fluid, power steering and brake fluid and clean your windshield for FREE. I would even check the air in your spare tire if you asked. Every tire on every car got 28-32 psi,….more or less. A different marketing style and definition of customer service back then maybe???????
Bad pics (will post better) but thanks to Bob (and Ricky) at Vortex got gt3rs front wheels, gt3 rear wheels, and gt3rs sideskirts mounted. I feel they compliment the targa bar nicely....
Bad pics (will post better) but thanks to Bob (and Ricky) at Vortex got gt3rs front wheels, gt3 rear wheels, and gt3rs sideskirts mounted. I feel they compliment the targa bar nicely....
Looks great! I still want to get some side skirts on mine but the GT3/RS wheels are real hotness...
Thanks. Ill post better pics when I get her cleaned up.
How many hours did you spend total for install?
I really wanted illuminated CF plates then after looking at the installation manual, I gave up and thinking about just changing it to regular CF plates.
How many hours did you spend total for install?
I really wanted illuminated CF plates then after looking at the installation manual, I gave up and thinking about just changing it to regular CF plates.
Not a chance I would have considered this job after what I saw it entailed . Dealer charged me 2.25 hours of labour...likely best labour spend I will do on the car. Just have to decide if I am going to PPF them now..the lettering is slightly raised, so not sure how PPF would look in that area.
I wasn't sure what I would think once installed, but the moment I opened the door I went WHOA! They are that good..and that was during bright daylight. Fairly certain I went out to the garage 6 times last night to open the driver's door before going to bed
Last edited by nicholascanada; 06-23-2021 at 04:36 PM.