Wheel Help
Thread Starter
Instructor
Joined: Jun 2015
Posts: 223
Likes: 31
From: South Florida
Wheel Help
I have a C2S with turbo wheels I'm looking to replace.
According to the owners manual the rears have an offset between 68-70 (both are listed in the wheel data and it doesn't differentiate between the different wheel options).
I see a set of wheels I would like that came from a 911 Turbo that have an offset of 56. Would these work with a spacer?
Thanks in advance.
According to the owners manual the rears have an offset between 68-70 (both are listed in the wheel data and it doesn't differentiate between the different wheel options).
I see a set of wheels I would like that came from a 911 Turbo that have an offset of 56. Would these work with a spacer?
Thanks in advance.
Rennlist Member
Joined: Feb 2009
Posts: 290
Likes: 8
From: Manotick, Ontario
As above, the change in offset is like adding a 12 or 14 mm spacer. Which I think would look good. I have 17mm extended on my 5-lug GTS, though you wouldn't want to go more aggressive than this.
Team Owner
Joined: Oct 2002
Posts: 26,112
Likes: 3,863
From: S.F Bay Area
Thread Starter
Instructor
Joined: Jun 2015
Posts: 223
Likes: 31
From: South Florida
I just checked using a straightedge and level. 1/2 inch would put the outside edge of my tire just flush with the top fender flair. I'm concerned about getting spray off the tires onto the body, we get a lot of rain here, raining now.
