911Idiot's C4S Journey - Keep out... Beware of Dog
#76
I just finished the job for my Passport 9500ix. It took me about 2 hours. My back/neck will never be the same. Thanks for the DIY pictures and tutorial. I would have never been able to do this with out your help and the others that posted here as well. I also watched 3 YouTube videos that were helpful.
#77
Rennlist Member
I just completed the job on my 2015 911 Turbo with the hardwire for my Valentine One. Thanks for the post. The wires were very small and difficult to handle but it was well worth the effort. Just made my day. Great stuff!!!!!
#78
I just finished this with a Valentine 1. However, when I opened the mirror housing the brown cord was not one piece with a metal end, but instead was cut and twisted together?
While I was putting the mirror back after the install, the brown end with the metal fell off (I believe this part was attached to the mirror) and now the brown cord with the copper fray ending is exposed. Everything seems to be working fine but is this going to be an issue???
Please see drawn picture for a better understanding. Sorry I should have taken pictures...
http://imgur.com/a/cNIln
While I was putting the mirror back after the install, the brown end with the metal fell off (I believe this part was attached to the mirror) and now the brown cord with the copper fray ending is exposed. Everything seems to be working fine but is this going to be an issue???
Please see drawn picture for a better understanding. Sorry I should have taken pictures...
http://imgur.com/a/cNIln
#79
Racer
This wiretap off the console worked great for me. Ten minutes for the whole job but I only had the blue connector so no auto off. Probably a blessing for me as I only need it occasionally.
The credit card tip was crucial.
The credit card tip was crucial.
#80
Rennlist Member
Worked for 718
#83
Rennlist Member
Can someone please confirm with 991 2012-2016, when vehicle is off the device hooked up to this brown and blue wire will shut off?
#84
Advanced
Yes, powers on when ignition is turned on, and off when ignition is off.
I personally had a problem with an airbag warning. Fault code indicated a bad ground. Suspect I knocked the ground wire lose on the connector that does into the plastic shell with the buttons.
I personally had a problem with an airbag warning. Fault code indicated a bad ground. Suspect I knocked the ground wire lose on the connector that does into the plastic shell with the buttons.
#86
Rennlist Member
#87
Well, I thought all was good with the blendmount wire tap install until today and tried my wipers and they don't work. When doing the intsall, i first tap'd the plug wthe plug with blue, brown and yellow wires thinking that my 2012 991 was a mid-year production and may have a different wire color (yellow instead of pink). When I tapped the blue and brown, the lights and the wipers turned on. That was when I realized the plug i needed was on the other side where I could not see it! Anyway, now I'm thinking about disconnecting the battery to see if that resets the computer and fixes the issue. The windshield washer still squirts, but no blade action.
Anyone run into this issue and have a fix?
Anyone run into this issue and have a fix?
#89
#90
Racer