Sharkys

I have an '05 C2S and have 350mm front and back. 6 piston up front

Jason @ Paragon Products

http://www.paragon-products.com/Sear...sp?Search=u49+

Pagid hasn't specifically said but looks like the 991 front RS29 application will be for the 991S based off the dimensions of the pad.

DKC64

Reviving an old thread. The PCCB throughout 997.1, 997.2 and 991 - are they exactly the same? Basically I'm trying to work out if I can take the PCCB off an 997.1 or 997.2 turbo and put it into my 991 C4S?

Also the rear rotors 330x28 used in 997.1S, 997.2 and 911 - are they exactly the same parts?

Thanks!

Reference:
997.1 Carrera (f) 318x28 (r) 299x24
997.1 Carrera S (f) 330x34 (r) 330x28
997.1 PCCB (f) 350x34 (r) 350x28
997.2 Carrera (f) 330x28 (r) 330x28
997.2 Carrera S (f) 330x34 (r) 330x28
997.2 PCCB (f) 350x34 (r) 350x28
991 Carrera (f) 330x28 (r) 330x28
991 Carrera S (f) 340x34 (r) 330x28
991 PCCB (f) 350x34 (r) 350x28

kosmo

remember the new calipers have a cross bridge on the top.

DKC64

I assume the 991 PCCB and 991S have different calipers/pads? What I meant was trying to take the whole PCCB rotor/caliper/pad setup from a 997.1 or 997.2 and put that into a 991S - will it fit?