Anyone Installed the RENNLINE CARBON FIBER FRONT LIP - 991.1
#1
Anyone Installed the RENNLINE CARBON FIBER FRONT LIP - 991.1
This one
https://www.rennline.com/rennline-99...t-lip-sku-e232
I'm thinking of buying this one but curious how it mounts over the stock lip. Any photos of it installed on a car? The ones on Rennline's @Rennline website aren't the best. I talked to Rennline at Werks Reunion in August and gave them some feedback on how I didn't like the idea of having to use the stock lip to support their lip.
https://www.rennline.com/rennline-99...t-lip-sku-e232
I'm thinking of buying this one but curious how it mounts over the stock lip. Any photos of it installed on a car? The ones on Rennline's @Rennline website aren't the best. I talked to Rennline at Werks Reunion in August and gave them some feedback on how I didn't like the idea of having to use the stock lip to support their lip.
The following users liked this post:
CarreraFahrer (09-12-2024)
The following users liked this post:
GeneratorX (09-12-2024)
#4
I'm in the same boat....if you have the sport lip on the standard front facia it almost sounds like you screw it into that then underneath the car.....which is fine, but if you don't have the OEM small front lip anymore like me :P( you need to source one. I would like to see some side pictures of it mounted as well. I would like to see how far it sticks out in front.
#5
Yep. My car has the sport suspension so it came with the sport lip. Mines almost 11 years and shows plenty of wear so I’d be ok with cutting it up instead of buying a new standard lip. If that works…
#6
I have it mounted and it sits up against the factory sport lip and uses stock mounting points across the bottom. It wasn't difficult yo install but helped that I had my car on a lift
Last edited by 89alpine; 09-12-2024 at 11:56 AM.
The following 2 users liked this post by 89alpine:
CarreraFahrer (09-12-2024),
Viper1000 (09-12-2024)
Trending Topics
#8
That's definitely the standard front lip and not the sport.
You can see how the Rennline lip follows the lines in the standard lip below. The top of the stock lip sticks out above the Rennline carbon lip.
Luckily i kept my stock lip when I swapped to the Sport.
You can see how the Rennline lip follows the lines in the standard lip below. The top of the stock lip sticks out above the Rennline carbon lip.
Luckily i kept my stock lip when I swapped to the Sport.
The following 2 users liked this post by GeneratorX:
CarreraFahrer (09-12-2024),
Viper1000 (09-12-2024)
#10
@89alpine did you cut the lower portion of the standard lip off?
Link to the CF lip
https://www.rennline.com/rennline-99...t-lip-sku-e232
Link to the CF lip
https://www.rennline.com/rennline-99...t-lip-sku-e232
Last edited by CarreraFahrer; 09-14-2024 at 11:50 AM.
#13
#14
#15
@GeneratorX did you receive your lip and or get it installed? I’m going to order one this week.
I'm going to try and install it this week as it's the easier one of the 3 ( Rear diffuser, Skirts and front lip) to install I think.
Maybe tomorrow, but more like Thurs.
Dave