Hemsporsche911

Has anyone installed this cup holder (Kaizen lighting) for the 991.2? It goes in the center console in the position that the 992 cup holder is. Looks intriguing but you have to take apart the center console to install it. The link is below.

https://flat6motorsports.com/product...39606693298260

Gary12000

As i new 911 recipient and having used the factory cup holders a bit, i just ordered this, I don't mind the factory cup holders not the best but iv'e had to use way worse, i'm hoping i will enjoy this a bit more as driving with half the dash hanging out is at best tolerable.

ICU991812

I've installed on a 991.1 and believe it's all the same for 991.2. Did something major change in the center console?

Hemsporsche911

This seems like a good solution when compared with the factory cup holders. I'm just a little hesitant to take the console apart and wanted to see if it was worth the hassle before i pull the trigger on this.

Dr.99

Wow I can’t believe I haven’t seen this before. Pricey but if it blends with the factory plastic, no brainer. Ordered.

As long as you have plastic interior pry tools, the console is super easy to take apart and put back together.

991_T

This will nice for the commuters coffee decanters, 16oz. water bottles fit fine in the factory pull out cup holder for me anyway.

This looks like it's a quick install without taking the console apart.
Package Includes: 1x Cup holder. Satin Black (Matching black to center console) Plug and play. 5 min install time.

Jack F

Interesting. Please do a review when you get it. Maybe a quickie vid. Looks interesting.

jbendaou

I think if they posted a video on how it’s installed, a lot of people will buy these…

ICU991812

Kaizen does have an install video. It's literally pulling the chrome surround from off. Pull the shifter aurround up, pull the small trim off, pull the button trim off. That piece ended up being hardest to pull off, then the little bin slides out. You slide in the soda holder, and pop all pieces back in reverse order. No tools needed except perhaps a plastic pry tool. Here are pics of the "low profile" version that holds soda, but i use to hold keys and coins.

jbendaou

Thanks. Found the video! https://drive.google.com/drive/folde...-b?usp=sharing

ICU991812

There are a few versions. The low profile that I got and posted above. A higher lip version that should be able to hold larger drinks more sturdy and a higher lip version with a slit to hold cell phones.

jbendaou

I kind of like the higher one. Thanks for sharing and for the post

ICU991812

it's a perfect OEM fit, but color is slightly more matte than the slightly shiny black trim. You can see the difference in my photo.

asellus

Yeesh, hard pass.

Try this.
https://www.ultimatecupholders.com/

911dude41

Pretty cool, is that a 992 key?

That looks like ***. Great way to give your interior cop car and work truck vibes.