911r diffuser installed on 991.2 carerra t
#31
Hopefully they lowered the rear perches! I just had to take mine out and move them! Im on Eibach but 26 7/8
also curious how much lower HR is..I’m also on winter wheels/tires that I believe have a smaller overall diameter than stock. Maybe measuring from center of wheel to fender might be more accurate?
also curious how much lower HR is..I’m also on winter wheels/tires that I believe have a smaller overall diameter than stock. Maybe measuring from center of wheel to fender might be more accurate?
#33
Drifting
Thread Starter
Looks really good. Waiting on pics of it on the ground. I had a shop install my H&R springs. What is your rear wheel gap? Trying to see what level they left the rear perches at. Also did you check to see if there is aftermarket units of this, I hate cutting up perfectly fitting OEM stuff ><
#34
Premium Dealer
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Rear gap before on h&r springs with the perch at the highest setting was around 27 and 5/8ths inch. Afterwards on the lowest spring perch setting it was around 27 and 1/8th (1/2 inch lower). I did find a capristo carbon fiber diffuser for the 991.2 gt3, however it was like $2500...really didnt want to cut that one up! The oem can be had for just over $500 from www.getporscheparts.com (which by the way was AWESOME to deal with). Jason @getPorscheparts went above and beyond to get me taken care of and the product shipped right away!!
Thanks so much for your business and please let us know if you need anything else!
__________________
Evan Winstead | Internet Parts Director
Shop & SAVE on Genuine OEM Porsche Parts, Accessories & Driver's Selection!
Contact Us · Shop Audi & BMW Parts too!
Evan Winstead | Internet Parts Director
Shop & SAVE on Genuine OEM Porsche Parts, Accessories & Driver's Selection!
Contact Us · Shop Audi & BMW Parts too!
#35
Rear gap before on h&r springs with the perch at the highest setting was around 27 and 5/8ths inch. Afterwards on the lowest spring perch setting it was around 27 and 1/8th (1/2 inch lower). I did find a capristo carbon fiber diffuser for the 991.2 gt3, however it was like $2500...really didnt want to cut that one up! The oem can be had for just over $500 from www.getporscheparts.com (which by the way was AWESOME to deal with). Jason @getPorscheparts went above and beyond to get me taken care of and the product shipped right away!!
The following users liked this post:
polobai (01-31-2020)
#36
Drifting
Thread Starter
Update-I was able to take the car out this weekend to the DRT cars and coffee in south Florida. I attempted to get some pics of the diffuser but it’s REALLY hard to get a pic of it to show up under the car. Here are my attempts-but I can say it looks really good and subtle IMO
The following users liked this post:
Ryan52589 (02-08-2020)
#37
Drifting
Thread Starter
Also, I made an extension out of carbon fiber and mounted it up to give it some extra flare. I like the look and think it flows very well. Here are some additional pics
Tried at night with some light on it.
Tried at night with some light on it.
#39
Nordschleife Master
Looks awesome. Congrats.
The extra CF piece looks super.
Diffuser sure looks low. I cannot get away with it here in NY with all the potholes and speed bumps.
The extra CF piece looks super.
Diffuser sure looks low. I cannot get away with it here in NY with all the potholes and speed bumps.
#42
Drifting
Thread Starter
Here’s some additional pics of the carbon piece I added to the center. It’s a pair of carbon canards I had for my gt4, and I used a sheet of carbon fiber to join them together with rivets. It mounts to the stock center faster on the bottom of the bumper and on the other end it’s mounted to the 911r diffuser with a nutsert
The gap in the middle is where the oem muffler sits
Another angle
Test fit
Shot from the rear
The gap in the middle is where the oem muffler sits
Another angle
Test fit
Shot from the rear
The following 2 users liked this post by polobai:
Jeahbladejeah (07-17-2020),
Ryan52589 (02-09-2020)
The following users liked this post:
Ryan52589 (02-09-2020)
#45
Rennlist Member