Rennline 991.2 Carrera Grill Screens Now Available!!
07-12-2020, 09:31 PM
#76
Drifting
C2S and I got them from Rennline. I'll make a video next week with the entire installation process, but in short I was a little disappointed with the product considering the price. I think any person with time and good experience working with aluminium can make similar screens for a fraction of the price. I went with Rennline because I wanted the best fit, but it took quite a bit of work (and bending) to install them. The instructions are also pretty lacking. You kinda have to figure things out on your own.
God bless,
TT
The following users liked this post:
Carlos Moro (07-12-2020)
08-05-2020, 08:17 PM
#79
Instructor
I have neither product. However, if I were to pursue this mod, I'd go with these: https://www.zunsport.com/us/porsche-...uter-grill-set
Their install is minutes (i.e. no bumper removal) and overall look just seems better aligned with the GT2RS look.
Their install is minutes (i.e. no bumper removal) and overall look just seems better aligned with the GT2RS look.
08-05-2020, 08:31 PM
#80
Rennlist Member
The following users liked this post:
Carlos Moro (08-12-2020)
The following users liked this post:
F1SML8R (08-06-2020)
08-06-2020, 12:19 AM
#83
Rennlist Member
@Wujohn When you pulled the slats out, did you not have to recode the functionality? I was under the impression it would trip an error message if you simply unplugged the hardware. If it doesn't, then I agree this is great DIY solution.
The following users liked this post:
F1SML8R (08-06-2020)
08-06-2020, 12:28 AM
#84
Instructor
Good to know, seems like it’s a non-issue.
11-01-2020, 09:31 PM
#85
Rennlist Member
Don’t know if this has already been asked or addressed but it seems that if any debris does get through these mesh grills (presumably much let will manage to get through than without the grills) that removal of any debris would require removal of the entire bumper, am I correct? Just curious to know how that would be dealt with.
11-02-2020, 10:24 AM
#86
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Debris small enough to find its way in can normally be blown back out with some compressed air. That is what we normally do at the shop!
11-02-2020, 10:26 AM
#87
Rennlist Member
Join Date: Jul 2001
Location: Marineland FL
Posts: 12,493
Likes: 0
Received 3,432 Likes
on
2,347 Posts
Don’t know if this has already been asked or addressed but it seems that if any debris does get through these mesh grills (presumably much let will manage to get through than without the grills) that removal of any debris would require removal of the entire bumper, am I correct? Just curious to know how that would be dealt with.
The following users liked this post:
Wrtflyr (11-02-2020)