When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do these front rotors look normal? I'm looking at a GTS online both fronts look like they have grooving? I can't tell if its reflection or not and haven't seen it in person. The rear rotors were replaced at 20k and the car has 33k on it now.
Guys, I need some help... I have a debadged my 991.1 GTS, and now I have ordered a 2 line badge (Porsche + 911 Carrera GTS), but my stealership has no template for the 2 line badge.. Noone in Europe wants to sell the template, and ordering the template from Suncoast from the US will set me back by about 900 USD (template + holder + shipping)... So I need some help. Can someone help me with the 4 measurements?
As a fyi: A is from the top of the badge to the body edge and not the edge of the black strip.
please tell us more. That is my end goal once both kids get out of college
is yours Manual or PDK? Interested especially in feedback if yours is a manual,
Thank you
Late reply-- mine is a PDK (I was actually never a fan of the manual in the non GT cars). The 4.5L conversion is hands down the best purchase ever. The difference in torque is like moving to a turbo car... but with the super engaging NA linear power curve. You'll be putting down more power at the wheels at all RPMs than a GT3 or even GT3RS does at the crank. The change in sound is also very welcome-- the 991.1 GTS already had the best NA engine in a carrera and the Deman conversion turns it into what sounds like an 911 RSR engine.
It honestly makes a 458 speciale feel rather timid in comparison.
Guys, I need some help... I have a debadged my 991.1 GTS, and now I have ordered a 2 line badge (Porsche + 911 Carrera GTS), but my stealership has no template for the 2 line badge.. Noone in Europe wants to sell the template, and ordering the template from Suncoast from the US will set me back by about 900 USD (template + holder + shipping)... So I need some help. Can someone help me with the 4 measurements?
As a fyi: A is from the top of the badge to the body edge and not the edge of the black strip.
Here ya go..A and B are 26mm C 14cm and D about 78-79mm harder to measure as I did not have a 'soft' ruler handy
05-28-2023, 07:41 PM
