Strasse 991 Turbo Wheel Thread
#1
Former Vendor
Thread Starter
Strasse 991 Turbo Wheel Thread
Hey Members!
This thread will be dedicated strictly to the 991 Turbo/Turbo S featuring Strasse Wheels! If anyone has any 991 Turbo or Turbo S on Strasse Wheels, feel free to post some pictures as we’d love to see them!
Strasse SM5R Deep Concave Duoblock
-2 Piece Configuration
-Brush & Gloss Clear
-Brush & Gloss Clear Barrels
-Weight Reduction Pocketing
-Center Lock Build
21x9.5 Front & 21x12.5 Rear
Pirelli P Zero
-255/30-21
-325/25-21
Suspension: H&R Sport Springs
This thread will be dedicated strictly to the 991 Turbo/Turbo S featuring Strasse Wheels! If anyone has any 991 Turbo or Turbo S on Strasse Wheels, feel free to post some pictures as we’d love to see them!
Strasse SM5R Deep Concave Duoblock
-2 Piece Configuration
-Brush & Gloss Clear
-Brush & Gloss Clear Barrels
-Weight Reduction Pocketing
-Center Lock Build
21x9.5 Front & 21x12.5 Rear
Pirelli P Zero
-255/30-21
-325/25-21
Suspension: H&R Sport Springs
#2
Former Vendor
Thread Starter
SM5R Deep Concave Monoblock
-Gloss Brushed Titanium
-Spoke Undercuts
-Weight Reduction Pocketing
21x9.5 Front | 21x12.5 Rear
Pirelli P Zero
-255/30-21
-325/25-21
Suspension: H&R Springs
www.StrasseWheels.com
[/CENTER]
-Gloss Brushed Titanium
-Spoke Undercuts
-Weight Reduction Pocketing
21x9.5 Front | 21x12.5 Rear
Pirelli P Zero
-255/30-21
-325/25-21
Suspension: H&R Springs
www.StrasseWheels.com
[/CENTER]
#4
Former Vendor
Thread Starter
Strasse SV1 Deep Concave Monoblock
-1 Piece Monoblock Configuration
-Gloss Brushed Blue
-Weight Reduction Pocketing
-5 Lug PCD Build
20x9 Front & 20x12 Rear
Pirelli P Zero
-245/35-20
-335/30-20
Suspension: H&R Sport Springs
-1 Piece Monoblock Configuration
-Gloss Brushed Blue
-Weight Reduction Pocketing
-5 Lug PCD Build
20x9 Front & 20x12 Rear
Pirelli P Zero
-245/35-20
-335/30-20
Suspension: H&R Sport Springs
#7
Former Vendor
Thread Starter
I apologize about that. After further looking into it, it has the factory 305/30-20 P Zero.
The following 991 Turbo that I will be posting does have the Michelin Pilot Super Sport 335/30-20 installed though!
The following 991 Turbo that I will be posting does have the Michelin Pilot Super Sport 335/30-20 installed though!
Last edited by Strasse Wheels; 12-20-2016 at 07:35 PM.
Trending Topics
#9
Former Vendor
Thread Starter
We design, engineer, and manufacture all of our wheels here in Miami, Florida only with USA made aluminum. We run FEA (Finite Element Analysis) on all wheel designs in every configuration and diameter as well as physically test each to ensure that what we offer exceeds the requirements for vehicle that it is intended for.
We have been in the wheel industry for 9 years now and have a great reputation as we have been doing things right since the very beginning and do not cut any corners whatsoever.
#10
Former Vendor
Thread Starter
SM5R Deep Concave Monoblock
-Satin Black
-Red Logos
-Weight Reduction Pocketing
20x9 Front | 20x12 Rear
Michelin Pilot Super Sport
-245/35-20
-335/30-20
Suspension: H&R Springs
www.StrasseWheels.com
-Satin Black
-Red Logos
-Weight Reduction Pocketing
20x9 Front | 20x12 Rear
Michelin Pilot Super Sport
-245/35-20
-335/30-20
Suspension: H&R Springs
www.StrasseWheels.com
#11
Not to be an ***, but all the wheels manufacturer's mentioned FEA this and that, but none care to share this information. Why not post your results up to show some level of credibility.
#13
Former Vendor
Thread Starter
Below you will see the SV1 Deep Concave Monoblock going through the FEA process prior to being milled out to send out for physical testing. We always run FEA prior to cutting the physical test piece to rule out any possible failures but the final testing is done and finalized once we send the physical wheel out for fatigue, impact, and stress testing.
We have absolutely nothing to hide and have been following the same process for all 9 years now!
Looks good right!
#15
Still plays with cars.
Lifetime Rennlist
Member
Nice looking wheels!
Regards,
Regards,