What did you do to your 991 turbo today?
The following users liked this post:
Steven31371 (04-22-2020)
#887
Advanced
Finally gave in and took the car for a drive this morning to let it see the new wheels and sample the ride on the 21"s....it took a while and some concern (not knowing what to expect) to learn the wheels but eventually it accepted them (no setting in wheel settings for 21") and I gotta say I expected a much worse ride quality than what I experienced...it actually is very acceptable and with the Eibach springs I found the ride very compliant, positive and or course "like on rails"..Although I never pushed it (still plenty of road gravel) I had to at least once tip it in a little aggressively from a light to get it a little sideways just to rekindle that TTS g-force grin..
#888
Instructor
#889
Racer
On stock suspension?
20x9 ET44
20x12 ET45
Gixxer:
On H&RS
21x9.5 et45
21x12 et48
The following users liked this post:
sullic (04-20-2020)
#890
Rennlist Member
Finally gave in and took the car for a drive this morning to let it see the new wheels and sample the ride on the 21"s....it took a while and some concern (not knowing what to expect) to learn the wheels but eventually it accepted them (no setting in wheel settings for 21") and I gotta say I expected a much worse ride quality than what I experienced...it actually is very acceptable and with the Eibach springs I found the ride very compliant, positive and or course "like on rails"..Although I never pushed it (still plenty of road gravel) I had to at least once tip it in a little aggressively from a light to get it a little sideways just to rekindle that TTS g-force grin..
The following users liked this post:
Gixxerboy63 (04-20-2020)
#892
Rennlist Member
#893
Instructor
Yes, its on stock suspension. Gixxerboy63 also has GT3 RS Side Skirts, while mine are standard gloss black. I'll look to swap out to the GT3RS Gloss Black
#895
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
So what did you do today with it?
#896
Almost there lol
we are doing the wing so that the insides that you can only see when the spoiler is raised are bright red.
#897
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
That looks very good indeed - they are sure taking their time, hope it is worth it!
The following users liked this post:
Steven31371 (04-22-2020)
#898
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Join Date: Jul 2015
Location: 2845 S.W. 69th CT. Miami, Fl. 33155
Posts: 3,096
Received 971 Likes
on
486 Posts
New for 2020: ANRKY S1-X1's made by HRE Performance Wheels.
More photos & full writeup coming coon.
More photos & full writeup coming coon.
__________________
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest Dealer In The World for HRE Wheels, ANRKY Wheels, Vorsteiner Wheels & Aero, Akrapovic Exhaust, & iPE Exhaust
BBS, Forgeline, & TechArt Premium Dealer
Brembo / Rotiform / KW / H&R / Novitec / Brabus / Mansory and tons more...
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest Dealer In The World for HRE Wheels, ANRKY Wheels, Vorsteiner Wheels & Aero, Akrapovic Exhaust, & iPE Exhaust
BBS, Forgeline, & TechArt Premium Dealer
Brembo / Rotiform / KW / H&R / Novitec / Brabus / Mansory and tons more...
The following users liked this post:
Steven31371 (04-22-2020)
#899
the wrap has a lot of depth of color and light to it, and it’s about two or three times as thick as a normal wrap so it will self heal from rock chips and protect the paint as well as PPF....but
The adhesive isn’t really up to holding that thick of a film down on the edges...so they are having to go slow and meticulous and put extra adhesive in key places...
im dying to get back My Precious but would rather it be there an extra couple days and be done right than get it back faster but then have to take it back later to fix a few lifted edges
in person it looks really really good so far
Last edited by Steven31371; 04-25-2020 at 11:03 AM.
#900
RL Community Team
Rennlist Member
Rennlist Member
Thread Starter
Absolutely; so close to the end with an identified adhesion problem, I would do the same. How many mils is this wrap over a standard wrap?