GMG Racing - Atomic Teal 991 GT3RS
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
GMG Racing - Atomic Teal 991 GT3RS
GMG Racing - Atomic Teal 991 GT3RS
We recently had the privilege of track prepping this beautiful 991 GT3RS at our Orange County facility. The owner has been a great client for several years. We have prepared a number of cars for him in addition to working with him on some professional racing endeavors.
For this particular build he was after a visceral car that could enjoyed out at the Thermal Club. With a vision in mind, we treated this GT3RS to a number of our GMG Signature Series parts in addition to the striking color change.
Inspired by our successes racing the 991 GT3R in the Pirelli World Challenge Series we developed the stainless GMG WC-GT center section exhaust. By installing this center section we dramatically enhanced the car’s exotic growl and simultaneously shed some weight.
Within the Alcantara and Carbon Fiber lined interior we installed our Chromoly GMG LMS harness/roll bar and 6-point Schroth belts to keep the driver strapped securely into the track-appropriate Sparco EVOIIUS seats.
In regards to the wheels, we turned to HRE and installed a set of their forged 19” RC103 Monoblocks. However the iconic “RS” center locks and caps were retained. Underneath the satin-black HRE wheels a full set of light-weight Brembo 2-piece floating rotors and Race Technology RE10 brake pads were installed.
Lastly, to give this GT3RS a unique twist we had the meticulous team at Protective Film Solutions overlay the original Lava Orange finish with an Atomic Teal vinyl wrap. The finished look turned out far better than we had hoped. The striking color helps to subtly enunciate the GT3RS’s shapely contours. It was the proverbial cherry-on-top that helped to tie the project together!
This GMG-tailored list of parts will give the client a better performing car, and undoubtedly an added shot of enjoyment when he gets the chance to track it at the Thermal Club in the next few weeks. While we have extensive experience racing the 991 professionally, we enjoy putting together these dual purpose street/track cars for clients. If you have any questions or would like to schedule an appointment give us a call or send over an email.
Parts List
-GMG LMS Roll Bar
-GMG WC-GT Center Section Exhaust (with ceramic thermal coating)
-GMG Front adjustable thrust arm bushing kit
-GMG-Signiture alignment using our in-house Beissbarth aligner
--19” HRE RC103 monoblock wheels
-Brembo 2-piece rotor kit
-Race Technologies RE10 brake pads
-GMG Seat Base Kit
-Sparco EVO II US seats
-Schroth Profi II GT3 belts
-AWE Air foilers
-Rennline tow hooks front/rear
-Clear OEM side markers
We recently had the privilege of track prepping this beautiful 991 GT3RS at our Orange County facility. The owner has been a great client for several years. We have prepared a number of cars for him in addition to working with him on some professional racing endeavors.
For this particular build he was after a visceral car that could enjoyed out at the Thermal Club. With a vision in mind, we treated this GT3RS to a number of our GMG Signature Series parts in addition to the striking color change.
Inspired by our successes racing the 991 GT3R in the Pirelli World Challenge Series we developed the stainless GMG WC-GT center section exhaust. By installing this center section we dramatically enhanced the car’s exotic growl and simultaneously shed some weight.
Within the Alcantara and Carbon Fiber lined interior we installed our Chromoly GMG LMS harness/roll bar and 6-point Schroth belts to keep the driver strapped securely into the track-appropriate Sparco EVOIIUS seats.
In regards to the wheels, we turned to HRE and installed a set of their forged 19” RC103 Monoblocks. However the iconic “RS” center locks and caps were retained. Underneath the satin-black HRE wheels a full set of light-weight Brembo 2-piece floating rotors and Race Technology RE10 brake pads were installed.
Lastly, to give this GT3RS a unique twist we had the meticulous team at Protective Film Solutions overlay the original Lava Orange finish with an Atomic Teal vinyl wrap. The finished look turned out far better than we had hoped. The striking color helps to subtly enunciate the GT3RS’s shapely contours. It was the proverbial cherry-on-top that helped to tie the project together!
This GMG-tailored list of parts will give the client a better performing car, and undoubtedly an added shot of enjoyment when he gets the chance to track it at the Thermal Club in the next few weeks. While we have extensive experience racing the 991 professionally, we enjoy putting together these dual purpose street/track cars for clients. If you have any questions or would like to schedule an appointment give us a call or send over an email.
Parts List
-GMG LMS Roll Bar
-GMG WC-GT Center Section Exhaust (with ceramic thermal coating)
-GMG Front adjustable thrust arm bushing kit
-GMG-Signiture alignment using our in-house Beissbarth aligner
--19” HRE RC103 monoblock wheels
-Brembo 2-piece rotor kit
-Race Technologies RE10 brake pads
-GMG Seat Base Kit
-Sparco EVO II US seats
-Schroth Profi II GT3 belts
-AWE Air foilers
-Rennline tow hooks front/rear
-Clear OEM side markers
__________________
sales@gmgracing.com
www.gmgracing.com
714.432.1582
facebook l instagram l youtube l twitter
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
sales@gmgracing.com
www.gmgracing.com
714.432.1582
facebook l instagram l youtube l twitter
Porsche | Audi | Ferrari | Lamborghini | McLaren
Performance Tuning | Motorsport | Factory Service
Pirelli World Challege Race Team GT/GTA/GTS/TC
Pirelli GT3 Cup Trophy USA
Porsche Motorsport — Audi Sport Customer Racing — Lamborghini Super Trofeo Series
Last edited by gmgracing; 05-19-2016 at 02:03 PM.
#4
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Looks great guys!
__________________
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
SupremePOWER Inc
1562 Kimberly Ave - Fullerton CA 92831
Contact: sales@supremepower.com - Shop# (714)632-1951
World's Largest Retailer/Distributor of BBS Motorsport & Street Wheels from 2015-2023
Huge Inventory: BBS, Kline, Brembo, Soul, Recaro, KW, Akrapovic & 200+ brands. Installation available
** Retail & Wholesale ** Global Delivery ** We match/beat any authorized dealer's price **
SupremePower.com // SupremeForged.com // Follow SupremePower on IG
#5
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Thank you everyone.
Roy, we wanted make for an interesting contrast with the original color. Wrapping everything would have negated that. The wrap was done by Protective Film Solutions.
Roy, we wanted make for an interesting contrast with the original color. Wrapping everything would have negated that. The wrap was done by Protective Film Solutions.
Last edited by gmgracing; 05-19-2016 at 01:09 PM.
#6
Nice, props to the owner for enjoying his RS properly.
Trending Topics
#8
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Martin - Right? I am looking forward to seeing it out there and being driven in earnest.
Irish - Good eye. The front Hoosiers we kept at 265/35, but for the rear tires we went a little wider (345/30).
Irish - Good eye. The front Hoosiers we kept at 265/35, but for the rear tires we went a little wider (345/30).
Last edited by gmgracing; 05-19-2016 at 01:10 PM.
#9
#11
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
This client wanted the car done asap and we were out of stock on the headers, so we built the car as is and then tested it at Thermal the next day.....his plan is to put headers on the car in the near future.
He also wanted the contrast of the Lava Orange and Teal blue wrap and I think it's obvious (at least to me haha) that it looks great.
Cheers!
He also wanted the contrast of the Lava Orange and Teal blue wrap and I think it's obvious (at least to me haha) that it looks great.
Cheers!
__________________
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
#12
This client wanted the car done asap and we were out of stock on the headers, so we built the car as is and then tested it at Thermal the next day.....his plan is to put headers on the car in the near future.
He also wanted the contrast of the Lava Orange and Teal blue wrap and I think it's obvious (at least to me haha) that it looks great.
Cheers!
He also wanted the contrast of the Lava Orange and Teal blue wrap and I think it's obvious (at least to me haha) that it looks great.
Cheers!