GMG Racing - Atomic Teal 991 GT3RS
#17
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
GMG Racing - Atomic Teal 991 GT3RS
We recently had the privilege of track prepping this beautiful 991 GT3RS at our Orange County facility. The owner has been a great client for several years. We have prepared a number of cars for him in addition to working with him on some professional racing endeavors.
For this particular build he was after a visceral car that could enjoyed out at the Thermal Club. With a vision in mind, we treated this GT3RS to a number of our GMG Signature Series parts in addition to the striking color change.
Inspired by our successes racing the 991 GT3R in the Pirelli World Challenge Series we developed the stainless GMG WC-GT center section exhaust. By installing this center section we dramatically enhanced the car’s exotic growl and simultaneously shed some weight.
Within the Alcantara and Carbon Fiber lined interior we installed our Chromoly GMG LMS harness/roll bar and 6-point Schroth belts to keep the driver strapped securely into the track-appropriate Sparco EVOIIUS seats.
In regards to the wheels, we turned to HRE and installed a set of their forged 19” RC103 Monoblocks. However the iconic “RS” center locks and caps were retained. Underneath the satin-black HRE wheels a full set of light-weight Brembo 2-piece floating rotors and Race Technology RE10 brake pads were installed.
Lastly, to give this GT3RS a unique twist we had the meticulous team at Protective Film Solutions overlay the original Lava Orange finish with an Atomic Teal vinyl wrap. The finished look turned out far better than we had hoped. The striking color helps to subtly enunciate the GT3RS’s shapely contours. It was the proverbial cherry-on-top that helped to tie the project together!
This GMG-tailored list of parts will give the client a better performing car, and undoubtedly an added shot of enjoyment when he gets the chance to track it at the Thermal Club in the next few weeks. While we have extensive experience racing the 991 professionally, we enjoy putting together these dual purpose street/track cars for clients. If you have any questions or would like to schedule an appointment give us a call or send over an email.
Parts List
-GMG LMS Roll Bar
-GMG WC-GT Center Section Exhaust (with ceramic thermal coating)
-GMG Front adjustable thrust arm bushing kit
-GMG-Signiture alignment using our in-house Beissbarth aligner
--19” HRE RC103 monoblock wheels
-Brembo 2-piece rotor kit
-Race Technologies RE10 brake pads
-GMG Seat Base Kit
-Sparco EVO II US seats
-Schroth Profi II GT3 belts
-AWE Air foilers
-Rennline tow hooks front/rear
-Clear OEM side markers
We recently had the privilege of track prepping this beautiful 991 GT3RS at our Orange County facility. The owner has been a great client for several years. We have prepared a number of cars for him in addition to working with him on some professional racing endeavors.
For this particular build he was after a visceral car that could enjoyed out at the Thermal Club. With a vision in mind, we treated this GT3RS to a number of our GMG Signature Series parts in addition to the striking color change.
Inspired by our successes racing the 991 GT3R in the Pirelli World Challenge Series we developed the stainless GMG WC-GT center section exhaust. By installing this center section we dramatically enhanced the car’s exotic growl and simultaneously shed some weight.
Within the Alcantara and Carbon Fiber lined interior we installed our Chromoly GMG LMS harness/roll bar and 6-point Schroth belts to keep the driver strapped securely into the track-appropriate Sparco EVOIIUS seats.
In regards to the wheels, we turned to HRE and installed a set of their forged 19” RC103 Monoblocks. However the iconic “RS” center locks and caps were retained. Underneath the satin-black HRE wheels a full set of light-weight Brembo 2-piece floating rotors and Race Technology RE10 brake pads were installed.
Lastly, to give this GT3RS a unique twist we had the meticulous team at Protective Film Solutions overlay the original Lava Orange finish with an Atomic Teal vinyl wrap. The finished look turned out far better than we had hoped. The striking color helps to subtly enunciate the GT3RS’s shapely contours. It was the proverbial cherry-on-top that helped to tie the project together!
This GMG-tailored list of parts will give the client a better performing car, and undoubtedly an added shot of enjoyment when he gets the chance to track it at the Thermal Club in the next few weeks. While we have extensive experience racing the 991 professionally, we enjoy putting together these dual purpose street/track cars for clients. If you have any questions or would like to schedule an appointment give us a call or send over an email.
Parts List
-GMG LMS Roll Bar
-GMG WC-GT Center Section Exhaust (with ceramic thermal coating)
-GMG Front adjustable thrust arm bushing kit
-GMG-Signiture alignment using our in-house Beissbarth aligner
--19” HRE RC103 monoblock wheels
-Brembo 2-piece rotor kit
-Race Technologies RE10 brake pads
-GMG Seat Base Kit
-Sparco EVO II US seats
-Schroth Profi II GT3 belts
-AWE Air foilers
-Rennline tow hooks front/rear
-Clear OEM side markers
This car is now back at Thermal for the summer and we can't wait to take it out again and tweak on the setup a little more as I know this car can get into the 2:10's.
__________________
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com
James F. Sofronas | President & Owner
Global Motorsports Group ™
E: james@gmgracing.com
P: +1 (714) 432-1582
F: +1 (714) 432-1590
A: 3210 South Shannon Street, Santa Ana, California 92704
W: gmgracing.com