When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Simple 3 car garage in the house.... new painted walls and floors, big *** lights, metal cabinets and hanger for the bikes.... some more wall art to come
Can anyone recommend a vendor in NJ/ NY who does these polished concrete floors? Can this be achieved from a standard basement slab that has had tiles removed? I think this finish is just right.
Can anyone recommend a vendor in NJ/ NY who does these polished concrete floors? Can this be achieved from a standard basement slab that has had tiles removed? I think this finish is just right.
Many thanks.
Polished concrete AKA burned finish is done as a last step when the slab is poured. The finisher runs his power trowel non stop as the concrete starts to set. Sometimes sprinkling water or sealer at the same time to make the surface "pop". Blades on the power trowel are usually worn out after a single large job.
Your slab can get a similar finish by renting a floor machine equipped with diamond pads. And a lot of water and slurry to clean up. But not a DIY job for most people.
Just recently finished mine, which I bought the house for. Nice house by the way, but it actually just "came" with the garage, which is very hard to come by in a close vicinity to a capital... Then the GT3 came ind and things got a bit crammed.
Some of you may be interested in some motorsport art.
Here is one I just finished for Vic Elford. He will be signing them and selling on his website. Also available without Vic's Signature from me direct. In celebration of Vic's 1968 win at Targa Floria. "TARGA TEMPEST"
If you are interested in seeing this and more motorsport art please visit my website and Merry Christmas.
12-19-2015, 10:41 PM
