FS / Feeler: Sapphire Blue 2015 GT3, LWB/PCCB/Loaded, New G6, New PDK, Ext Warr, NTX
#1
Rennlist Member
Thread Starter
FS: Sapphire Blue 2015 GT3, LWB/PCCB/Loaded, New G6 Engine, New PDK, Ext Warr, NTX
Hey y'all - I decided to upgrade to a 992 GT3 so I'm looking at selling (or trading) my 2015. Great condition, no paintwork, zero issues. I bought this car in December 2018 with 3,730 miles on the clock and have enjoyed every mile since then. Full transparency, this car has seen track time. The PCCBs sat on a shelf, and they got put back on last week, along with new OE Cup 2s twenty (yes twenty) miles ago. Odometer is currently at 29,982 miles. There is PPF around the whole car sans roof and wing from the original owner.
I won the new G6 engine lottery and got a new one installed one year ago. Also had a new PDK installed a few months ago under extended warranty. The transferrable Porsche/Safegard platinum warranty is still en force until February 2025 in case you find anything wrong that my dealer didn't find in the last checkup (you won't).
Only modification is a paint-matched Graham Rahal / BBi roll cage. Only blemish is a door ding in the left rear quarter on the back side of the wheel arch. Ruined my day when it happened in March 2019. No way to fix without paintwork; there's a weld behind it. I said F it, I don't want paintwork on this car. I had the PPF removed, had it glue pulled to where it's 90% gone, and then had the PPF reapplied. You can't even see it in the picture below but nobody likes surprises.
Located in Frisco, Texas. Looking for $149K.
I won the new G6 engine lottery and got a new one installed one year ago. Also had a new PDK installed a few months ago under extended warranty. The transferrable Porsche/Safegard platinum warranty is still en force until February 2025 in case you find anything wrong that my dealer didn't find in the last checkup (you won't).
Only modification is a paint-matched Graham Rahal / BBi roll cage. Only blemish is a door ding in the left rear quarter on the back side of the wheel arch. Ruined my day when it happened in March 2019. No way to fix without paintwork; there's a weld behind it. I said F it, I don't want paintwork on this car. I had the PPF removed, had it glue pulled to where it's 90% gone, and then had the PPF reapplied. You can't even see it in the picture below but nobody likes surprises.
Located in Frisco, Texas. Looking for $149K.
Last edited by Andi; 05-18-2024 at 06:44 PM.
The following 5 users liked this post by Andi:
911-140.6 (05-10-2024),
928 GT R (06-17-2024),
awu (05-14-2024),
FL4T-SIX (05-10-2024),
Manhattan_trout (05-10-2024)
#2
Rennlist Member
Stunning example with all the major boxes ticked off , which should make this 91.1 GT3 number 1 on anyone's consideration List .
Good luck with finding a new home for it.
Good luck with finding a new home for it.
The following users liked this post:
Andi (05-10-2024)
#3
Rennlist Member
I'd lsit it on either BAT or PCarMarket ... market it to the largest audience possible
#4
Rennlist Member
Dang, can't blame ya for moving to a 992 but sad to see this go. Absolutely beautiful spec.
The following users liked this post:
Andi (05-10-2024)
#5
Rennlist Member
Wow! Incredible car, spec, and price for a ready to run 991.1 GT3 with a fresh engine, fresh CC brakes, fresh PDK, buckets, etc! GLWS!!
Last edited by Quikag; 05-11-2024 at 07:08 PM.
The following users liked this post:
Andi (05-10-2024)
#6
Rennlist Member
Thread Starter
The following users liked this post:
Larry Cable (05-12-2024)
#7
Rennlist Member
The following users liked this post:
Andi (05-11-2024)
Trending Topics
#8
Well done post with attention to deal.
If the someone doen't mind track time, this is a solid example of a GT3!
If the someone doen't mind track time, this is a solid example of a GT3!
The following users liked this post:
Andi (05-11-2024)
#9
Wow no nits to pick here gentlemen...someone scoop it up! Great job in this listing and with the care seller provided during his stewardship of this one. And I just love any blue shade for a P car!
The following users liked this post:
Andi (05-12-2024)
#10
Rennlist Member
worth noting that BAT and PCarMarket will charge $7500 and $5000 fees respectively if one were to buy this via their auctions ... so if someone here wants to buy ... save yourself the time and money, DO THE DEAL!
The following users liked this post:
Andi (05-12-2024)
#12
Rennlist Member
Ive not driven the GT3 much in the last year - it deserves a home where it will get used (its currently 37xx miles, my 20' Spyder has more miles on it) ... no 992 for me I wont pay ADMs ...
if I could find a Spyder RS at MSRP I might trade up ... but that's a unicorn!
if I could find a Spyder RS at MSRP I might trade up ... but that's a unicorn!
The following users liked this post:
Andi (05-18-2024)
#14
Rennlist Member
Thread Starter
Photos of G6 engine serial number during install, March 28, 2023 @ 23,101 miles.
#15
Rennlist Member
Thread Starter
Just fully detailed including dry ice blasting the undercarriage. Last chance before BAT.