View Poll Results: GT3 Touring Colour (Ordered or Delivered) Vote if locked in
Black/JetBlack
95
12.93%
White/Carrara White
67
9.12%
Guards Red
25
3.40%
Yellow
10
1.36%
Graphite Blue
37
5.03%
Rhodium
8
1.09%
Sapphire Blue
29
3.95%
Agate Grey
51
6.94%
GT Silver
113
15.37%
Carmine Red
25
3.40%
Chalk/ Crayon
63
8.57%
Lava Orange
5
0.68%
Miami Blue
23
3.13%
PTS - Bright Colour
33
4.49%
PTS - Dark Colour
45
6.12%
PTS - Classic Vintage
106
14.42%
Voters: 735. You may not vote on this poll
The OFFICIAL GT3 Touring owners pictures thread..
The following 10 users liked this post by Bigs911:
AlexCeres (05-06-2021),
atlrvr (05-23-2021),
B951S (05-14-2021),
heshalosny (05-06-2021),
neoprufrok (05-06-2021),
and 5 others liked this post.
05-23-2021, 08:56 PM
#3828
Burning Brakes
Driving it, yes.
The following 3 users liked this post by LionelB:
The following 5 users liked this post by Chewylewis:
Brian4lev (01-29-2022),
jo_ker (07-06-2021),
Porsche911GTS'16 (05-24-2021),
s_earl1 (05-28-2021),
Tangerine (05-24-2021)
05-24-2021, 09:26 PM
#3831
The following 17 users liked this post by Holdens:
911frostys (05-25-2021),
911Vintage (05-26-2021),
atlrvr (05-26-2021),
Berjar (05-24-2021),
carb0n (06-01-2021),
and 12 others liked this post.
05-26-2021, 09:04 PM
#3832
Rennlist Member
The following 6 users liked this post by atlrvr:
geoorlando (05-31-2021),
jo_ker (07-06-2021),
Porsche911GTS'16 (05-27-2021),
RolandT (05-27-2021),
Tangerine (05-26-2021),
and 1 others liked this post.
05-26-2021, 09:26 PM
#3833
Brewster or Dark Olive? Gorgeous either way.
05-27-2021, 10:23 AM
#3834
Rennlist Member
It's Brewster and thanks! The car really only photos well (brings out the hint of yellow) during lower light, even though in person I think it always looks great.
05-28-2021, 09:20 AM
#3835
Can anyone help with any information in regards to the external trim around the side and rear windows.
My Touring was specced with chrome trim which I am not a fan off so I decided to purchase the black trim from Porsche here and have it fitted including the replacement of the rear side windows.
We have an issue where the top trim does not conform to the car at all especially around the bend of the roof near the A pillar and over the door windows forward of the B pillar.
The white clips are all done up the join to the rear glass is ok just a slight gap in those areas of around .5 mm.
The rubber on the strip is not hard up against the body / paint as the chrome trim was.
Does anyone have any ideas?
We have tried two different mouldings already and can seem to get it right.
Desperate for help and a solution.
Thanks in advance.
My Touring was specced with chrome trim which I am not a fan off so I decided to purchase the black trim from Porsche here and have it fitted including the replacement of the rear side windows.
We have an issue where the top trim does not conform to the car at all especially around the bend of the roof near the A pillar and over the door windows forward of the B pillar.
The white clips are all done up the join to the rear glass is ok just a slight gap in those areas of around .5 mm.
The rubber on the strip is not hard up against the body / paint as the chrome trim was.
Does anyone have any ideas?
We have tried two different mouldings already and can seem to get it right.
Desperate for help and a solution.
Thanks in advance.
05-28-2021, 11:25 AM
#3836
Originally Posted by TMAUS
Can anyone help with any information in regards to the external trim around the side and rear windows.
My Touring was specced with chrome trim which I am not a fan off so I decided to purchase the black trim from Porsche here and have it fitted including the replacement of the rear side windows.
We have an issue where the top trim does not conform to the car at all especially around the bend of the roof near the A pillar and over the door windows forward of the B pillar.
The white clips are all done up the join to the rear glass is ok just a slight gap in those areas of around .5 mm.
The rubber on the strip is not hard up against the body / paint as the chrome trim was.
Does anyone have any ideas?
We have tried two different mouldings already and can seem to get it right.
Desperate for help and a solution.
Thanks in advance.
My Touring was specced with chrome trim which I am not a fan off so I decided to purchase the black trim from Porsche here and have it fitted including the replacement of the rear side windows.
We have an issue where the top trim does not conform to the car at all especially around the bend of the roof near the A pillar and over the door windows forward of the B pillar.
The white clips are all done up the join to the rear glass is ok just a slight gap in those areas of around .5 mm.
The rubber on the strip is not hard up against the body / paint as the chrome trim was.
Does anyone have any ideas?
We have tried two different mouldings already and can seem to get it right.
Desperate for help and a solution.
Thanks in advance.
05-28-2021, 06:31 PM
#3837
We are wondering it this is a bad batch or there must be a way to get this to fit as per factory fit.
The following users liked this post:
Breitling747 (06-04-2021)
05-29-2021, 05:06 AM
#3839
Originally Posted by TMAUS
Yes I could have done that initially but a have spent the money on all new parts in matt black and they should fit straight in being a genuine Porsche part.
We are wondering it this is a bad batch or there must be a way to get this to fit as per factory fit.
We are wondering it this is a bad batch or there must be a way to get this to fit as per factory fit.
05-31-2021, 07:12 PM
#3840
The following users liked this post:
heshalosny (06-01-2021)