My 1st 987S mod!
#1
Racer
Thread Starter
My 1st 987S mod!
Well, other than the clear corners. This is a tough job, I was sweating it out pulling off the original vents, afraid of busting them! It will take a couple days for me to decide if I like the new look. I planned on changing wheels for Black or Chrome, so the Silver vents seemed out of place!
Last edited by BradS(IN); 08-05-2013 at 10:00 PM.
#3
I sort of like my silver on midnight blue combo ... it might look better if it were completely closed/smooth like a 997. The body color fins look OK, but probably because 1) yellow is not my cup of tea, and 2) I'm so used to the silver ones I rather enjoy them.
#4
Rennlist Member
Much improved...good work!
#5
What exactly are the steps/process for getting them out? I have been wanting to try but have only found a few incomplete posts over on the RennTech forums. Looks great BTW.
Also, where in (IN) are you located?
Also, where in (IN) are you located?
#6
Racer
Thread Starter
South Bend.
Simply remove the originals with a twisting, prying motion, and pop them off. The new ones snap right into place. Try this link:
http://www.ppbb.com/boards/ppbbphp/s...fpart=all&vc=1
Simply remove the originals with a twisting, prying motion, and pop them off. The new ones snap right into place. Try this link:
http://www.ppbb.com/boards/ppbbphp/s...fpart=all&vc=1
#7
It literally felt like I was going to break them when I last tried, so I've stopped trying I wanted to try out the "de-snorkle" modification if only to hear a louder growl.
Trending Topics
#8
Racer
Thread Starter
You just have to stay with it, firmly pulling upward and outward. I used an interior tool with a small hook to help "unclip" the tab in the last bottom fin. Not for the weak of stomach, I must admit!