WTB: HVAC blower housing
#1
Drifting
Thread Starter
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 2,080
Likes: 0
Received 14 Likes
on
10 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm looking for either parts or the entire assembly from a 1995 968 with the cabin filters. If just the parts, I need the vacuum canisters, associated linkages and the flap doors, but I will take everything if you have one.
Last edited by CurtP; 09-18-2010 at 09:47 AM.
#2
Drifting
Thread Starter
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 2,080
Likes: 0
Received 14 Likes
on
10 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'm not absolutely sure, but a 1994+ standard blower housing may work too. If anyone happens to have the blower housing out of their 1994 or 1995, could you take a couple of pictures of the vacuum actuators and linkages for me, please?
Last edited by CurtP; 09-18-2010 at 10:11 AM.
#3
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Its a shame you can't use one out of a 951, I have one of those sitting around and would love to get rid of it.
Good luck with the search, there aren't going to be many available.
Regards, ...Scott
Good luck with the search, there aren't going to be many available.
Regards, ...Scott
#7
Drifting
Thread Starter
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 2,080
Likes: 0
Received 14 Likes
on
10 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Here's a picture of a standard blower assembly. It isn't mine - I didn't get a chance to pull mine back out to take pictures of it yet. As far as I can tell, it has to be a blower assembly that has the cabin filters to have the correct flaps (the doors inside that are moved by the vacuum actuators seen in the picture).
Mike/Raj - are the ones you have just standard blower assemblies or the ones with cabin filters? Any chance of a picture of the linkages where the vacuum servos attach to the flaps?
Mike/Raj - are the ones you have just standard blower assemblies or the ones with cabin filters? Any chance of a picture of the linkages where the vacuum servos attach to the flaps?
![](http://gallery.me.com/curt.phillips/100110/climblowmot1/web.jpg?ver=12849863200001)