More pictures of this Matter cage/roll bar?
#1
iPod Tamer
Rennlist Member
Rennlist Member
Thread Starter
More pictures of this Matter cage/roll bar?
So I thought I had seen most of the rare bits on 944/968's until I ran across the picture of this 968 Club Sport with a Matter roll bar in it. Anyone have any more pictures of this?
#2
On the Radar
Rennlist Member
Rennlist Member
Colin
Check this thread.
Notice how the cage ties into the front strut towers.
I have more pics but I'm away from my computer on my iPhone.
https://rennlist.com/forums/968-foru...o-rs-pics.html
Check this thread.
Notice how the cage ties into the front strut towers.
I have more pics but I'm away from my computer on my iPhone.
https://rennlist.com/forums/968-foru...o-rs-pics.html
#4
iPod Tamer
Rennlist Member
Rennlist Member
Thread Starter
Yeah thats why I thought this one was interesting since it just bolts in. I have never seen it before. I believe I have seen a few Club Sports listed for sale that mentioned a cage in them but they never had pictures of it.
#5
Rennlist Member
The piece resembles the Redline Rennsport design bolt-in roll-bar I used to have in my 944. Very nice product that bolts right in. I could install it or take it out all by myself in about 20-30 mins. Very handy for dual-purpose cars.
http://www.redlinerennsport.com/SafeguardPage.html
http://www.redlinerennsport.com/SafeguardPage.html
Trending Topics
#10
iPod Tamer
Rennlist Member
Rennlist Member
Thread Starter
Nice pictures but that is not the cage I am looking for. The one I posted in the first post is a factory bolt in roll bar that only attaches at the seatbelt mounting bolts and the C-pillar bolts. It does not extend to the front or rear of the car.
#11
Pro
Mine is not a "matter cage",it is very much my design, based closely on a Porsche GTRS designed cage, and pic attached. Ignore the loose parts in the pic, this is a pic from the build phase. Is immaculate now. It may give you alternate ideas.
Last edited by MC 968CS; 10-23-2012 at 10:40 PM.
#12
Burning Brakes
Sorry to bring back this thread but i thought you might want to see this.I have one of those matter roll bars, it's going in my club sport replica.
#14
iPod Tamer
Rennlist Member
Rennlist Member
Thread Starter
Finally someone comes forward with pictures! I would love to get some really detailed dimensions and pictures of this to have a replica made.
#15
Burning Brakes
I don't know how i could measure it in order for you to be able to make a replica, those bends can be a little tricky to measure.