Front Splitter advice
#16
Race Director
Hey guys,
If there is interest, I would be more than happy to do a splitter for you guys also
I can make it out of whatever you would like, but I would highly recommend something along the lines of ABS/HIPSs(high impact plastics). They keep their shape with little to no deflection at high speeds, but are definitely forgiving when encounterinng speed bumps, steep driveways, road debris, etc....They are also UV/gas/oil resitant.
The good thing is you guys can pretty much pick what you want it to look like. The amount of interest will dictate the cost, but to give you a rough idea, I could keep the cost under $300 per unit if there is interest for at least 20 units
Just a thought....and there is no rush. Unless the wife kills me, I should be here for quite sometime
Feel free to ask any questions, thank you for your time.
If there is interest, I would be more than happy to do a splitter for you guys also
I can make it out of whatever you would like, but I would highly recommend something along the lines of ABS/HIPSs(high impact plastics). They keep their shape with little to no deflection at high speeds, but are definitely forgiving when encounterinng speed bumps, steep driveways, road debris, etc....They are also UV/gas/oil resitant.
The good thing is you guys can pretty much pick what you want it to look like. The amount of interest will dictate the cost, but to give you a rough idea, I could keep the cost under $300 per unit if there is interest for at least 20 units
Just a thought....and there is no rush. Unless the wife kills me, I should be here for quite sometime
Feel free to ask any questions, thank you for your time.
#21
Burning Brakes
Join Date: Mar 2006
Location: New York City
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
#24
Burning Brakes
Join Date: Jul 2005
Location: San Rafael, CA
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
I haven't purchased from CPR yet, but it looks like Patrick makes some good stuff and the folks on the 951 forum will vouch for him. Check out his site, he's real open to suggestions on future projects.
http://www.944-951parts.com/