968 Cup chin spoiler
#16
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Must have one, must have one.
#17
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Greimann
Here is a good closeup of the splitter from Carnewal. It has a Porsche part number - 968 505 071 00, but it is not listed in the PET or any other parts resource that I have seen. .
Do you remove anything or just add it to the lower part of the stock nose?
I'm thinking of getting one for my wife's 968Cab.
#19
Advanced
Join Date: Dec 2003
Location: Orange County, CA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by ltc
How does this part mount?
Do you remove anything or just add it to the lower part of the stock nose?
I'm thinking of getting one for my wife's 968Cab.
Do you remove anything or just add it to the lower part of the stock nose?
I'm thinking of getting one for my wife's 968Cab.
You have to remove the lower valence, match drill the holes (oversize) and reinstall the assembly.
This also assumes that you have painted unit to match the car. A note about that: make sure you (or the painter) uses an elastomeric additive in the paint to make it super flexible. You will hit things with this, and if you don't have the elastomeric additive in the paint, it will crack.