Brey-Krause Lower Chassis Support Brace for 968
#1
Pro
Thread Starter
Join Date: Mar 2004
Location: NJ, USA
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Brey-Krause Lower Chassis Support Brace for 968
Anyone have any opinion / experience using the Brey-Krause Lower Chassis Support Brace on a 968?
cooz
95 993 C2
94 968 for track/race
cooz
95 993 C2
94 968 for track/race
#3
It's pricey, but worth it if you have a cab. With that and the Dynatech strut tower brace I had to adjust my rear anti roll bar because the front was biting so well. It wouldn't be my first mod, though-get the mo30 sways and the CS steering wheel first.
#5
Rennlist Member
Old post...but any new experience here? Would it stiffen the front? Would that cause additional understeer or help keep the chassis square and true? I get a sense I am getting a lot of twist in the chassis as it ages. Also, any experience with the rear torque tube delete kit?
Thanks, Mike
Thanks, Mike
#7
Rennlist Member
I found it made a lot of difference, yes it did cause additional understeer, but to me that means it is making a difference to the stiffness of the car, the understeer can be fixed in other ways.
Trending Topics
#8
Rennlist Member
low speed understeer or high speed us?
#10
Rennlist Member
I searched but no luck, anyone have a pic?
#11
Rennlist Member
#13
Rennlist Member
The one things I have not heard mentioned, was if you have the underneath panel in the front installed. If so, you will either have to remove it or cut into it to get this Brey-Krause Lower Chassis Support Brace to fit correctly.
#14
Rennlist Member
Fly, not sure what piece you mention but I had to make no mods whatsoever to fit the brace.
#15
Rennlist Member
986TurboS, I had another brace prior and switched to Brey-Krause Lower Chassis Support Brace. Great brace and definitely worth the money but I had to make a couple of adjustments to make it work for my vehicle. Glad yours worked with no issues.
Last edited by flwbyu; 07-28-2013 at 03:47 PM. Reason: SPKE