Update on 968 Turbo Project
#1
Rennlist Member
Thread Starter
Update on 968 Turbo Project
Posted an update of my 968 turbo project on YouTube. There are also a few other videos of other projects there as well. I'm hoping that public posts will help me to get the car finished in a timely fashion.
https://www.youtube.com/channel/UCg0...apZZQY27Sz0g2w
https://www.youtube.com/channel/UCg0...apZZQY27Sz0g2w
The following users liked this post:
J1NX3D (09-21-2021)
#5
Rennlist Member
Thread Starter
ABS Question
Great catch! Yes. I used 1986 944 Turbo rear trailing arms. From the factory, the 1986 cars had aluminum trailing arms nearly identical to the 968. Porsche was doing some pre-planning and had the ABS sensor locations molded into the arms, but the locations had to be milled and tapped. The second difference is how the bearing is held in place. The 968 uses a 4 bolt plate and the earlier cars a “C” clip. In order for the early offset drive flanges to clear the trailing arm, only the “C” clip style works. The 4 bolt flanges interfer with the early offset drive flange. The ABS stub axles work with the early drive flange and the early offset aluminum trailing arms.
#7
Rennlist Member
Thread Starter
Rear Wheels
For wheels, I had a set of BBS wheels made (9” front, 10” rear) to match the late/early combination.
Last edited by 968gene; 01-19-2019 at 10:13 AM.
Trending Topics
#8
Very nice project! Look forward to seeing it up and running soon. What led you to the decision for the AEM Infinity? Just curious, as I'm still researching what standalone system to use.
#9
Rennlist Member
Thread Starter
AEM
at the time I purchased the Infinity,I had a tuner experienced in the AEM products lined up to handle the dyno sessions.
#10
That sounds like a good reason to me The computer is one of my big concerns with adding the turbo, making sure I have a good baseline to fire up with and then getting it tuned right. I'm not very familiar with any of them, and could see that part being a major pain. On my last build I just installed new chips- nice and easy!
#11
Rennlist Member
Thread Starter
ECU
That sounds like a good reason to me The computer is one of my big concerns with adding the turbo, making sure I have a good baseline to fire up with and then getting it tuned right. I'm not very familiar with any of them, and could see that part being a major pain. On my last build I just installed new chips- nice and easy!
#12
#14
Rennlist Member
Thread Starter