terje

I have now measured the inside rim to the flat spot between the nuts.
I measured the front rim to 178mm, same as you (7,25")
I also measured the back rim to 191mm, (7,75")

I have now orded new outer lips, 1,25" and 2,25"

My rims will then be 8,5x18 and 10x18

Thanks for all the help

Terje

jim dorociak

With an inside rim of that depth which is 1/2" deeper inside than a standard Speedline 6.5" front inner rim be prepared to get a 3 - 5 mm spacer to run on the front to help ensure you do not hit inner fender on full lock. jdorociak@gmail.com jim Ask metal guru what size front spacer he is running to fill the wheel well.

GT TWO

Reviving this thread, Hi Bernard can you tell me do the 5mm spacers work with standard studs? or do I need to get longer ones fitted?

Thanks!

Bernard

With 5mm you will be fine with stock studs anything wider you would need to replace them. I ran them on my black car pictured above and also run the 5mm on my blue car with no issues.

GT TWO

Many thanks Bernard!

Just trying to find some that have a similar finish to the hubs....