965 3.3 heat exchangers
03-25-2010, 05:32 AM
#1
Instructor
Thread Starter
Join Date: Feb 2010
Location: Ayrshire,Scotland
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
965 3.3 heat exchangers
Hi guys.Does anyone have 2 good used heat exchangers for my 1991 3.3 turbo.Preferably in the U.K. but I'll consider anything and anywhere.Update is brakes done,plugs done,tappets done,1/2 suspension done.Not much left now.
03-25-2010, 04:08 PM
#6
Burning Brakes
It's an original Porsche one I got fitted to my car shortly after purchase by the dealer - the one fitted to the car was blowing when I picked it up!
It was removed last autumn when I took the car off the road to fit a complete stainless system. There are no holes or cracks - but as you can see, some of the original black paint is flaking off.
It was removed last autumn when I took the car off the road to fit a complete stainless system. There are no holes or cracks - but as you can see, some of the original black paint is flaking off.
03-25-2010, 06:48 PM
#7
Instructor
Thread Starter
Join Date: Feb 2010
Location: Ayrshire,Scotland
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
03-25-2010, 07:02 PM
#8
Instructor
Thread Starter
Join Date: Feb 2010
Location: Ayrshire,Scotland
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for that but It looks like megatron has half of what I need.I only need the heat exchangers and Im guessing you wont want to split up your system?
03-25-2010, 07:12 PM
#10
Burning Brakes
03-25-2010, 07:15 PM
#11
Instructor
Thread Starter
Join Date: Feb 2010
Location: Ayrshire,Scotland
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
03-26-2010, 05:16 PM
#14
Rennlist Member
Ok, everyone calm down
My point is that stock heat exchangers are plentiful and the trend seems to be that almost everyone ends up with headers eventually. Therefore I would expect that you should be able to pick up a serviceable pair for $200 U.S. at the most.
03-26-2010, 05:33 PM
#15
Instructor
Thread Starter
Join Date: Feb 2010
Location: Ayrshire,Scotland
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Well theyre not plentiful over here and as Im recommissioning this car after a long sleep I kinda wanted to make it original.Luckily Megatron uk has promised me a l/hand one and hopefully I'll be able to source a r/hand.Maybe you could help me locate one?My trouble is that there are a couple of broken studs in the heads and I need to cut the pipes about 2" from the heads to gain access to remove the broken studs.For obvious reasons I dont want to do that before Ive got the new ones