964 Door Pocket Attachment Reinforcement
#62
Any chance someone can send a photo or video tutorial of this? I just received mine, but would like something to follow along to...
NEVERMIND Foxman's tutorial was great!
NEVERMIND Foxman's tutorial was great!
Last edited by freedy7100; 07-12-2017 at 06:23 PM. Reason: Found what I was looking for :)
#63
Rennlist Member
Thread Starter
964 Door Pocket Reinforcements
964 Door Pocket Reinforcements
Next ship date will be Friday July 28th.
If you are interested in a set of 964 door pocket reinforcements:
If I receive your PayPal by 8PM CST on the Wednesday before the ship date, your item will ship on the Friday ship date.
No items get shipped until PayPal received.
Current list of members for 964 door pocket reinforcements:
Next ship date will be Friday July 28th.
If you are interested in a set of 964 door pocket reinforcements:
- First - You post to this thread and indicate interest in a set
- Second - You follow up with a PM to me that indicates "964" (yes, that's important) along with your name and mailing address
- After you complete the 2 steps above, I will PM you a link for paying with PayPal. Use a browser (not one of the mobile apps) to view this PM because links in PMs are disabled by the mobile apps.
If I receive your PayPal by 8PM CST on the Wednesday before the ship date, your item will ship on the Friday ship date.
No items get shipped until PayPal received.
Current list of members for 964 door pocket reinforcements:
- Nylasurf - Paypal received
#66
Are there any tricks to removing the door pocket?
I removed all 6 screws (1 inside the pocket, 1 near the end of the door, 3 on the bottom and 1 near the front of the door)
but the pocket is still hung up at the door handle area?
I removed all 6 screws (1 inside the pocket, 1 near the end of the door, 3 on the bottom and 1 near the front of the door)
but the pocket is still hung up at the door handle area?
#67
Drifting
Here is a visual https://rennlist.com/forums/964-foru...ml#post1970845
#68
But the one at the lid hinge doesn't attach to the door pocket right?
Mine is hung up just below the door handle & latch area.
may be the speaker crossover unit??
Mine is hung up just below the door handle & latch area.
may be the speaker crossover unit??
There should be 7 screws total: 5 around the perimeter of the pocket and 2 under the lid, 1 at the lid hinge and one by the door handle (the area which breaks).
Here is a visual https://rennlist.com/forums/964-foru...ml#post1970845
Here is a visual https://rennlist.com/forums/964-foru...ml#post1970845
#69
#70
Rennlist Member
Thread Starter
Correct, the screw at the lid hinge does not need to be removed to remove the door pocket itself.
And no need to remove the door handle or latch either.
Post #2 of this thread has links to door pocket removal (and now includes the 964 specific link that LPMM provided above).
If these don't help perhaps you need to apply a small amount of force to pull the pocket from the door panel or perhaps there is a modification performed by the previous owner?
At the rear and the front of the door pocket, each of these areas can be pulled away from the door? All the way across the bottom as well?
Sorry I can't be more help, not sure what is keeping your pocket from separating from the door.
Maybe a picture indicating exactly where the hangup is would help.
EDIT: On the 993, there is a nub on the door handle that extends slightly into a hole in the door pocket. Probably the same on the 964. If you pull the door pocket downward, I bet you will be able to release it.
The first picture in the 993 door pocket attachment thread shows the location of the hole/notch in the door pocket that the nub on the door handle extends into. Right edge of the picture. There is a little bit of vinyl covering the hole.
And no need to remove the door handle or latch either.
Post #2 of this thread has links to door pocket removal (and now includes the 964 specific link that LPMM provided above).
If these don't help perhaps you need to apply a small amount of force to pull the pocket from the door panel or perhaps there is a modification performed by the previous owner?
At the rear and the front of the door pocket, each of these areas can be pulled away from the door? All the way across the bottom as well?
Sorry I can't be more help, not sure what is keeping your pocket from separating from the door.
Maybe a picture indicating exactly where the hangup is would help.
EDIT: On the 993, there is a nub on the door handle that extends slightly into a hole in the door pocket. Probably the same on the 964. If you pull the door pocket downward, I bet you will be able to release it.
The first picture in the 993 door pocket attachment thread shows the location of the hole/notch in the door pocket that the nub on the door handle extends into. Right edge of the picture. There is a little bit of vinyl covering the hole.
Last edited by BesideTheBox; 07-23-2017 at 10:27 PM. Reason: Another thought
#73
Rennlist Member
Thread Starter
964 Door Pocket Reinforcements Shipped Out
964 door pocket reinforcements for the following Rennlisters shipped out this morning.
These should arrive early next week
Post a picture when you get them installed.
These should arrive early next week
Post a picture when you get them installed.
- Nylasurf
- A8KED
- urquattro20Vt
#74
Rennlist Member
Thread Starter
964 Door Pocket Reinforcements
964 Door Pocket Reinforcements
Next ship date will be Friday August 25th.
If you are interested in a set of 964 door pocket reinforcements (verify this reinforcement will work for your 964 door pocket):
If I receive your PayPal by 8PM CST on the Wednesday before the ship date, your item will ship on the Friday ship date.
No items get shipped until PayPal received.
Current list of members for 964 door pocket reinforcements:
Next ship date will be Friday August 25th.
If you are interested in a set of 964 door pocket reinforcements (verify this reinforcement will work for your 964 door pocket):
- First - You post to this thread and indicate interest in a set
- Second - You follow up with a PM to me that indicates "964" (yes, that's important) along with your name and mailing address
- After you complete the 2 steps above, I will PM you a link for paying with PayPal. Use a browser (not one of the mobile apps) to view this PM because links in PMs are disabled by the mobile apps.
If I receive your PayPal by 8PM CST on the Wednesday before the ship date, your item will ship on the Friday ship date.
No items get shipped until PayPal received.
Current list of members for 964 door pocket reinforcements:
- <empty>
#75
Rennlist Member
Thread Starter
964 Door Pocket Reinforcements
bump
964 Door Pocket Reinforcements
Next ship date will be Friday August 25th.
If you are interested in a set of 964 door pocket reinforcements (verify this reinforcement will work for your 964 door pocket):
If I receive your PayPal by 8PM CST on the Wednesday before the ship date, your item will ship on the Friday ship date.
No items get shipped until PayPal received.
Current list of members for 964 door pocket reinforcements:
Next ship date will be Friday August 25th.
If you are interested in a set of 964 door pocket reinforcements (verify this reinforcement will work for your 964 door pocket):
- First - You post to this thread and indicate interest in a set
- Second - You follow up with a PM to me that indicates "964" (yes, that's important) along with your name and mailing address
- After you complete the 2 steps above, I will PM you a link for paying with PayPal. Use a browser (not one of the mobile apps) to view this PM because links in PMs are disabled by the mobile apps.
If I receive your PayPal by 8PM CST on the Wednesday before the ship date, your item will ship on the Friday ship date.
No items get shipped until PayPal received.
Current list of members for 964 door pocket reinforcements:
- <empty>