Intro on me and my car
#1
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Folks
My name is Anders and i am from sweden 45 years old and the children have finaly grown up so that i could buy my car.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
After a long time i did get my 964 itīs a 1990 C2 all original even with a cellphone antenna
had it about 2weeks got it for 200.000:- SEK about 29,900USD wich is a good deal over here,the car have been standig outside unatended for 2 years by previous owner (in sweden with snow and crap) left under a sobbin pine :/ so the paint and rubber/plasitc parts are all done and dryed out, but hey itīs a brand new engine from the shelf over @ Porsche hamburg (23 000km and 22.4286 USD invested) put in by previous owner thank you! otherwise i would have looked on for another one.
![](http://s26.postimg.org/behs35rvt/10271281_10201590415674847_7974909090584608897_o.jpg)
![](http://s26.postimg.org/vzwjv29gp/10419568_10201775931432625_7502429140446544384_n.jpg)
I have started to do some changes to it thou like interior DIY,seats,steering wheel,chassie on incoming,the wheels are gona get some new colour.
![](http://s26.postimg.org/totwd59bd/IMAG0362.jpg)
![](http://s26.postimg.org/temdtsup5/IMAG0340.jpg)
![](http://s26.postimg.org/f9l65qb1l/IMAG0401.jpg)
![](http://s26.postimg.org/wqpa0ubu1/10344856_10201724518147325_8192679472950141217_n.jpg)
![](http://s26.postimg.org/w2gfhwd49/10364188_10201726451675662_2959809998822553744_n.jpg)
Decals fitted
![](http://s26.postimg.org/wbillkfah/IMAG0439.jpg)
guess thatīs all for now.
My name is Anders and i am from sweden 45 years old and the children have finaly grown up so that i could buy my car.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
After a long time i did get my 964 itīs a 1990 C2 all original even with a cellphone antenna
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
![](http://s26.postimg.org/behs35rvt/10271281_10201590415674847_7974909090584608897_o.jpg)
![](http://s26.postimg.org/vzwjv29gp/10419568_10201775931432625_7502429140446544384_n.jpg)
I have started to do some changes to it thou like interior DIY,seats,steering wheel,chassie on incoming,the wheels are gona get some new colour.
![](http://s26.postimg.org/totwd59bd/IMAG0362.jpg)
![](http://s26.postimg.org/temdtsup5/IMAG0340.jpg)
![](http://s26.postimg.org/f9l65qb1l/IMAG0401.jpg)
![](http://s26.postimg.org/wqpa0ubu1/10344856_10201724518147325_8192679472950141217_n.jpg)
![](http://s26.postimg.org/w2gfhwd49/10364188_10201726451675662_2959809998822553744_n.jpg)
Decals fitted
![](http://s26.postimg.org/wbillkfah/IMAG0439.jpg)
guess thatīs all for now.
Last edited by LimmetED; 06-04-2014 at 01:04 PM.
#5
Racer
Thread Starter
Trending Topics
#8
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Well the steering i did not,but the rest yes.
I think i did the dash about four times before gettin it right (mockup on twosided tape).
![](http://s26.postimg.org/ncjch1vmx/IMAG0236.jpg)
![](http://s26.postimg.org/6aqieygrt/IMAG0241.jpg)
And on this one i tried orange stich a bit wobbly thou,but after gettin a twin needle 8mm it got better and easier to do the stitches
I think i did the dash about four times before gettin it right (mockup on twosided tape).
![](http://s26.postimg.org/ncjch1vmx/IMAG0236.jpg)
![](http://s26.postimg.org/6aqieygrt/IMAG0241.jpg)
And on this one i tried orange stich a bit wobbly thou,but after gettin a twin needle 8mm it got better and easier to do the stitches
![](http://s26.postimg.org/60izvm25l/IMAG0247.jpg)
Last edited by LimmetED; 05-31-2014 at 05:08 PM.
#9
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Wow, never seen Tillets in a 964 before
I was at a racewear suppliers a couple of weeks ago and the owner reckoned they are the best seats avaialble, bar none, for weight/strength and quality
I was at a racewear suppliers a couple of weeks ago and the owner reckoned they are the best seats avaialble, bar none, for weight/strength and quality