Project Dog Lipstick
#32
Three Wheelin'
#33
Burning Brakes
We're all doing our bit recycling to save the planet
Any more updates Tom
Any more updates Tom
#36
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Stoke Poges, UK
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Cheers guys. I'm so busy that updates won't be daily boooooo
Darth. With regard to under the wings I shall be removing the rust then etch, high build primer paint. Once dry apply a sealing strip fit the wing(which will also be painted on the inside) seal the top edge then paint with the rest of the car. Sealing wax is then applied to the underside.
Darth. With regard to under the wings I shall be removing the rust then etch, high build primer paint. Once dry apply a sealing strip fit the wing(which will also be painted on the inside) seal the top edge then paint with the rest of the car. Sealing wax is then applied to the underside.
#37
Great work Tom ,sorry that the other web site has taken what I consider to be a stupid stance
I have posted in the mods section how I fell about his actions
Not sure I will be a Moderator over there by the end of today after my remarks
I have posted in the mods section how I fell about his actions
Not sure I will be a Moderator over there by the end of today after my remarks
#43
Racer
good luke with the 911uk thing i can see both sides of the argument but would like to see you back there soon as this is your car, your hobby to do a project and share it with us and see your talant i personaly dont see why you should have to pay for it regards ray
#44
Rennlist Member
Join Date: Nov 2010
Location: North Yorkshire, England
Posts: 855
Likes: 0
Received 16 Likes
on
14 Posts
Hi Tom,
I'm sorry about the stance taken on the other channel, so I'll re-post my comment here and in the meanwhile I hope they reinstate you
For my two penneth, I believe your projects have a trickle down advantage to other advertisers on that site from you inspiring people to do jobs/projects of their own and buying advertisers products & services.
I'll be following you here as I don't want to miss it
Good luck mate,
Paul
I'm sorry about the stance taken on the other channel, so I'll re-post my comment here and in the meanwhile I hope they reinstate you
You're a man on a mission by the look of it
Your grey was one of my all time favourite 964's, actually I'm selling you short, it was my favourite!
I'm really looking forward to this
Your grey was one of my all time favourite 964's, actually I'm selling you short, it was my favourite!
I'm really looking forward to this
I'll be following you here as I don't want to miss it
Good luck mate,
Paul
#45
Rennlist Member
Thread Starter
Join Date: Nov 2011
Location: Stoke Poges, UK
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Cheers for the support guys.
What it all boils down to is the fact that I'm just a massive Porsche fan and I want to give an insight into what these cars are like underneath. Also to show the average DIY mechanic that although these cars are very well engineered most jobs can be done in your garage at home.
What it all boils down to is the fact that I'm just a massive Porsche fan and I want to give an insight into what these cars are like underneath. Also to show the average DIY mechanic that although these cars are very well engineered most jobs can be done in your garage at home.