964 Intro/Build Thread
#16
Rennlist Member
Thread Starter
#18
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Bumping this thread
Coilovers are in
I opted for the engine carrier reinforcement since I'm going to go with either Wevos or RS mounts. I was too nervous that with the very stiff coilovers and new mounts that it would crack or bend.
Wheels have been changed from upsized (16"-18") BBS RS's to a full custom set of Rotiforms instead.
Pics to come
Coilovers are in
I opted for the engine carrier reinforcement since I'm going to go with either Wevos or RS mounts. I was too nervous that with the very stiff coilovers and new mounts that it would crack or bend.
Wheels have been changed from upsized (16"-18") BBS RS's to a full custom set of Rotiforms instead.
Pics to come
#21
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
HELP!
So I did lower valve cover gaskets and changed my oil. Car is all buttoned up, pulled the DME built oil pressure, put back in, and car will start but not idle and die. Backfires when I give it some throttle, and smells rich.
Any ideas?
So I did lower valve cover gaskets and changed my oil. Car is all buttoned up, pulled the DME built oil pressure, put back in, and car will start but not idle and die. Backfires when I give it some throttle, and smells rich.
Any ideas?
#24
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The Camaro looks jealous
#25
Rennlist Member
Thread Starter
#26
Addict
Rennlist Member
Rennlist Member
#28
Rennlist Member
Thread Starter