OZ Alleggerita Wheels for 964
#16
I'm looking forward to hearing your decision on the widths & offsets ... I worked on the decision for weeks (maybe months) .. plenty of time in the garage with a tape-measure trying to measure the perfect solution ... so your selection will be interesting.
#18
Racer
Thread Starter
Join Date: Feb 2011
Location: Chester County, PA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
Stephane
NOTE: I have received several emails and PMs, and will have to offer these wheels as a priority to those who have reached out to me early on.
#19
Rennlist Member
I am almost ready to order these wheels, just a bit weary of the weakness of the material. I have not found anything as to how they hold in autocross conditions. Are these prone to bend easy???
I realy like this color, I am hoping this would look good on a midnight blue car.
Stephane
I realy like this color, I am hoping this would look good on a midnight blue car.
Stephane
I had looked at these for my RSA, but my concerns was stress and as some of the pic's showed cracks or breaks. I thought I remember on tirerack that if you put in
your car it will give you the offsets you need?
Since I street drive/track drive my wheels I went with 18" Fikse FM10's(lightly used).
I like the look, the weight and the durability a 3pc. gives. The Fikse's used were
around the same price as the OZ's. I have a friend who drives a GT2 and uses OZ's and likes them. Just my 2 cents.........
Last edited by chakka; 03-21-2014 at 02:57 PM.
#23
Try ..... miles@tirerack.com
Miles was very helpful and patient answering all my emails.
Damon did not reply to a few of my emails unfortunately.
Miles was very helpful and patient answering all my emails.
Damon did not reply to a few of my emails unfortunately.
#24
Front
8ET50 .. which is what i have bought and details in the my link.
Rear
for the 9ET43 ... i used this link .. http://www.rimsntires.com/specs.jsp ... and it looks like with the 9ET43, the outside rim edge will be 16mm inwards compared to my 10ET40 .. so if you read my 10ET40 thread, you can get a feel for the clearance to the wheel guard.
#25
Racer
Thread Starter
Join Date: Feb 2011
Location: Chester County, PA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
When I entered a 964 into tirerack ...
Front
8ET50 .. which is what i have bought and details in the my link.
Rear
for the 9ET43 ... i used this link .. http://www.rimsntires.com/specs.jsp ... and it looks like with the 9ET43, the outside rim edge will be 16mm inwards compared to my 10ET40 .. so if you read my 10ET40 thread, you can get a feel for the clearance to the wheel guard.
Front
8ET50 .. which is what i have bought and details in the my link.
Rear
for the 9ET43 ... i used this link .. http://www.rimsntires.com/specs.jsp ... and it looks like with the 9ET43, the outside rim edge will be 16mm inwards compared to my 10ET40 .. so if you read my 10ET40 thread, you can get a feel for the clearance to the wheel guard.
BTW,.. I am receiving emails from Damon,... Will see what he has to say about my 964 set up.
Stephane
#26
#27
Racer
Thread Starter
Join Date: Feb 2011
Location: Chester County, PA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
#28
Racer
Thread Starter
Join Date: Feb 2011
Location: Chester County, PA
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
What's the deal with Tire Rack,...? I placed an order and last night received a call from one of their rRep to tell me that they don't have all of the wheels and tires in one warehouse, and that they can't comingle everything in one place. I was told an ETA for delivery of 8-10 weeks,... WTF
I may be able to sort out the deal if I drop the Hankook R-S3 for a different set of tire. Khumo were also out of the equation no go. What else out there in the 140 - 180 no greater than 200 treadware,..?
I have no wheels as it stands right now.
I may be able to sort out the deal if I drop the Hankook R-S3 for a different set of tire. Khumo were also out of the equation no go. What else out there in the 140 - 180 no greater than 200 treadware,..?
I have no wheels as it stands right now.
#29
What's the deal with Tire Rack,...? I placed an order and last night received a call from one of their rRep to tell me that they don't have all of the wheels and tires in one warehouse, and that they can't comingle everything in one place. I was told an ETA for delivery of 8-10 weeks,... WTF
I may be able to sort out the deal if I drop the Hankook R-S3 for a different set of tire. Khumo were also out of the equation no go. What else out there in the 140 - 180 no greater than 200 treadware,..?
I have no wheels as it stands right now.
I may be able to sort out the deal if I drop the Hankook R-S3 for a different set of tire. Khumo were also out of the equation no go. What else out there in the 140 - 180 no greater than 200 treadware,..?
I have no wheels as it stands right now.
i made sure that my wheels were in stock (although they were in stock in different US warehouses but it only took a few days to pull the order together in the main warehouse).
can you search the different colour options to find something in stock? not ideal, but better than waiting!
what about the dunlop star-spec? they have great reviews also.
#30
Former Vendor
What's the deal with Tire Rack,...? I placed an order and last night received a call from one of their rRep to tell me that they don't have all of the wheels and tires in one warehouse, and that they can't comingle everything in one place. I was told an ETA for delivery of 8-10 weeks,... WTF.