Door pocket lid removal **Sorted**
#1
Three Wheelin'
Thread Starter
![Smile](https://rennlist.com/forums/images/icons/icon7.gif)
Gents,
Last night I removed my door trim to fit leather door handles and door pocket lids.
To remove the door pocket lid I popped off the spring clip (if thats what its called?) that retains the bracket at the end of the door (the bracket which moves up and down as the pocket is raised, lowered).
However, I lost the clip!!!
The clip is the one shown in the photo. Please ignore the red circle.
Does anyone know what the skip is called and where I can buy one?
Thanks
Chris
Last night I removed my door trim to fit leather door handles and door pocket lids.
To remove the door pocket lid I popped off the spring clip (if thats what its called?) that retains the bracket at the end of the door (the bracket which moves up and down as the pocket is raised, lowered).
However, I lost the clip!!!
The clip is the one shown in the photo. Please ignore the red circle.
Does anyone know what the skip is called and where I can buy one?
Thanks
Chris
![](http://img.photobucket.com/albums/v479/D2BBA/step2016.jpg)
Last edited by deutschland-dobson; 10-15-2011 at 03:11 PM.
#2
Three Wheelin'
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Its an internal tooth spring washer I think
http://www.google.co.uk/images?um=1&...=Search+images
It doesnt seem to be listed on PET though
http://www.google.co.uk/images?um=1&...=Search+images
It doesnt seem to be listed on PET though
#6
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Fuch ![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Ive ordered a big pack of mixed clips including "star clips" as these seem to be called by some sellers.
I'll let you know if none fit!
Chris
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Ive ordered a big pack of mixed clips including "star clips" as these seem to be called by some sellers.
I'll let you know if none fit!
Chris
#7
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Gents,
Ive hit another snag with my door pocket lid replacement. Just how many problems can I get in such a "simple" job?![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
The metal rod that conects the pocket lid to the door pushes through a black plastic moulding. Within the moulding is a sprung loaded retaining pin which allows the pocket to be sprung open and closed. The retaining pin has a hole in the centre which I presume the rod locates into, however the spring is covering the pin and preventing this. Im not sure how it should work? Does the spring just push down somehow to allow the road to be inserted?
Its really puzzling me as there isnt any access and ive tried quite a few ways to get it to fit?
Any help would be appreciated![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Chris
Ive hit another snag with my door pocket lid replacement. Just how many problems can I get in such a "simple" job?
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
The metal rod that conects the pocket lid to the door pushes through a black plastic moulding. Within the moulding is a sprung loaded retaining pin which allows the pocket to be sprung open and closed. The retaining pin has a hole in the centre which I presume the rod locates into, however the spring is covering the pin and preventing this. Im not sure how it should work? Does the spring just push down somehow to allow the road to be inserted?
Its really puzzling me as there isnt any access and ive tried quite a few ways to get it to fit?
Any help would be appreciated
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Chris
Trending Topics
#9
Instructor
Join Date: May 2008
Location: East Midlands, UK.
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Chris,
The white plastic retainer should be through the roll pin inside then the spring goes on over this retainer and pushed down. Then the chrome bar (long piece) slides through the first slot (opposite the side with holes in,) then the top hole of the white retainer, and the spring should be held in place once pushed though to the other slot and the star clip attached.
Hope thats what you ment? I have one broken down in front of me if I can help any further.
Cheers
Andy.
The white plastic retainer should be through the roll pin inside then the spring goes on over this retainer and pushed down. Then the chrome bar (long piece) slides through the first slot (opposite the side with holes in,) then the top hole of the white retainer, and the spring should be held in place once pushed though to the other slot and the star clip attached.
Hope thats what you ment? I have one broken down in front of me if I can help any further.
Cheers
Andy.
#10
Three Wheelin'
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Andy
,
So the spring has to be compacted to enable the chrome bar to be slotted through and the star clip attached?
I dont suppose you could post a pic of the components could you? Its hard to see how they all fit together when its assembled!
My big pack of star clips are too big, so im going to have to find one small enough. Do you have a spare?
Chris
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
So the spring has to be compacted to enable the chrome bar to be slotted through and the star clip attached?
I dont suppose you could post a pic of the components could you? Its hard to see how they all fit together when its assembled!
My big pack of star clips are too big, so im going to have to find one small enough. Do you have a spare?
Chris
#11
Instructor
Join Date: May 2008
Location: East Midlands, UK.
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Don't have a spare clip, not even one on this. Yes the spring needs to be compressed. Sorry poor photo.
Andy.
Andy.
Last edited by BIG'UN; 07-09-2012 at 01:02 PM.
#13
Instructor
Join Date: May 2008
Location: East Midlands, UK.
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Chris have you sorted it yet?
Was able to get a few star clips today so have 4 spares,not exactly the same, but do the job fine.
PM an address and I'll get them sent off to you.
Cheers
Andy.
Was able to get a few star clips today so have 4 spares,not exactly the same, but do the job fine.
PM an address and I'll get them sent off to you.
Cheers
Andy.