Project "Amazon" Restoration-Lightweight C4- 2Pack paint soon;-)
#976
Three Wheelin'
Thread Starter
Thanks guys.
With ceramic polishing is when you place an object such as a wheel in a barrel that contains smooth ceramic pellets of different grade on different stages. So the pellets may start of larger in the size of a 20pence piece, then smaller and smaller pellets until you end up using smaller than a pea little ceramic *****. The pellets will vibrate for many hours at the same time a solution is sprayed on the ceramic *****.
The technique is only mastered by those who know the quality of metal on these cast, aluminum, billet, forge wheels and the timing with the vibrations per hour, the right solution and the right size pellets.
Then machine polished for a final stage, to take off any edges or any imperfections.
Here is a set of BBS RS 5x130 17" center trial and tested for Amazon, fully ceramic polished.
Gert at Carnewal is my goto guy for BBS stuff.
www.carnewal.com no affil, excellent service!
Norm, I'm so impressed with your project, your attention to detail (as has been mentioned by others previously) is fantastic!
What is involved in the ceramic polishing? I just did machine polish on my BBS wheels. Does this finish hold up better? The germans do a hochglanzverdichtung: Hochglanzverdichten - YouTube pretty cool.
Is Andy the same Andy that does work for 9M? Is he not associated with Sounthbound Trimmers?
Can't wait to see the final product
www.carnewal.com no affil, excellent service!
Norm, I'm so impressed with your project, your attention to detail (as has been mentioned by others previously) is fantastic!
What is involved in the ceramic polishing? I just did machine polish on my BBS wheels. Does this finish hold up better? The germans do a hochglanzverdichtung: Hochglanzverdichten - YouTube pretty cool.
Is Andy the same Andy that does work for 9M? Is he not associated with Sounthbound Trimmers?
Can't wait to see the final product
The technique is only mastered by those who know the quality of metal on these cast, aluminum, billet, forge wheels and the timing with the vibrations per hour, the right solution and the right size pellets.
Then machine polished for a final stage, to take off any edges or any imperfections.
Here is a set of BBS RS 5x130 17" center trial and tested for Amazon, fully ceramic polished.
#977
Three Wheelin'
Thread Starter
Gert at Carnewal is my goto guy for BBS stuff.
www.carnewal.com no affil, excellent service!
Is Andy the same Andy that does work for 9M? Is he not associated with Sounthbound Trimmers?
Can't wait to see the final product
www.carnewal.com no affil, excellent service!
Is Andy the same Andy that does work for 9M? Is he not associated with Sounthbound Trimmers?
Can't wait to see the final product
Yes your right Andy has done a lot of 9M project cars, so he is not strange to any Porsche trim. No he has nothing to do with Southbound.
He is A1 and so is MJ Interiors, who has a great connections with Andy and Southbound. Both started out life trimming Volkswagen aircooled and watercool.
#979
Three Wheelin'
Thread Starter
#982
Three Wheelin'
Thread Starter
What do you think to these? The wheels kindly 'sponsored' by the guys at Fifteen52 - Matt & Brad in the US http://fifteen52.us the same guys who help develop Ken Block's Ford Fiesta, the New Volkswagen Beetle Turbo at SEMA, etc.
http://fifteen52.us/
http://fifteen52.us/
http://fifteen52.us/
http://fifteen52.us/
http://fifteen52.us/
http://fifteen52.us/
http://fifteen52.us/
http://fifteen52.us/
Last edited by Nski; 08-28-2013 at 09:15 PM.
#984
Three Wheelin'
Thread Starter
#985
Was about to comment on these sitting on the floor next to the E28s on the last page... Would love to see them on the maritime blue to get the full picture. I'm sure the E28s will look more period correct and would probably be my personal preference, but the white wheels would look very tough, especially if the ride height is super low
#986
Fantastic thread! Just read through it from page 1, and I really look forward to see the end result.
If I have understood it correctly, you currently have 4 964’s? If so, it would be great to see them together in some pictures in this thread.
If I have understood it correctly, you currently have 4 964’s? If so, it would be great to see them together in some pictures in this thread.
#987
Three Wheelin'
Thread Starter
#988