JDD

Apparently, non OEM wheels are not allowed in DE. Does anyone have a set of 7.5/9s for sale?

Thanks,
Justin

JDD

or 7/9s

BlueHeeler

There are usually Cup I, II, and replicas on eBay, craigslist, or the Rennlist For Sale sections. You have to be a member to use the Rennlist For Sale section or the 964 For Sale/Wanted thread.

Dwane

Geoffrey confirmed the copies from mille miglia are just as solid as original.
I believe they were made at the same factory.
I just picked up a set in turbo sizes and will be using them for DE.
Dwane

ilko

cory jump has a set for sale on Pelican, in blue.

joey bagadonuts

Here's another option but in 7/8's. E-mail address included.

One set of 1993 RS America OEM "Mille Miglia Cup 1" wheels for sale. Wheels had approximately 80,000miles on them before being professionally refinished. They are pristine and have very few miles on them since refinishing, then were stored safely in wheel boxes. Wheel specs are as follows:

Front: 7" wide, offset 55mm - Part# 965 362 124 00
Rear: 8" wide, offset 52mm - Part# 965 362 126 01

Wheels come with original center caps engraved with the Porsche crest.

The wheels are located in Vancouver, BC, CANADA. I am asking $1800CAD or $1700USD. Buyer pays for shipping. Offers will be considered. Would like to sell quickly.

I can be reached at the following email address: rbauhart@hotmail.com
Or cell phone: 778-989-2719

Thanks,

Roland

eman123

How about 6" x 16" and 8" x 16"? I have set with tires in awesome shape...

Wachuko

Or come pick these up. I just don't/can't deal with boxing them and shipping....

Still available.

1. CUP Wheels

2x 7x17 ET55 in the front Part# 965 362 124 00
2x 8x17 ET52 in the rear Part# 965 362 126 01

Straight and true, no bends, but they do have blemishes (red paint cracking).

Currently painted red, can easily be refinished. Center caps included.

Summer tires with over 95% thread remaining included.

Front Kumho ECTSA Supra - 205/50 ZR17
Rear Kumho ECTSA Supra - 255/40 ZR17

These wheels are for a narrow bodied car. These are the factory wheels that came with the 911 RS America.

US$1,000.00 local pick up in Orlando, FL


Photos:

Colin 90 C2

I have a set that need refinishing, but are straight and true. they are currently on my car and you are more that welcome to take it for a drive. I am probably less than 2 hours from you.
I also have other oem wheel sets, both in 16's and 17's.

ducnine

I have replicas on mine and it was never a concern at any of the PCA DEs that I have participated in.

J richard

Never had or seen this be an issue...how did this come up?

944/951guy

I have a set of 7's and 8's
Both rears are dented but fixable.
Looking for $550 plus shipping.

JDD

From the Tech sheet:

[ ] [ ] WHEELS: no cracks or bends; tight lug nuts & valve caps. No imitation Porsche wheels

Is this a new requirement?

J richard

Never seen this. You might pull your wheels and look for a TUV stamp or casting it's either the letters or a little triangular symbol. If it has that it means they were certified for use on German roadways and it would be hard for anyone to argue they are not up to snuff. That requirement is pretty arbitrary, no BBS if it wasn't a factory part?

pantera43

I believe what they are talking about are the earlier cars Carrera 3.2 3.0 etc... that have the Chinese knock offs of Fuchs. Not TUV approved wheels such as the Mille Miglia's. Plenty of people using them at DE's.

Dan