Cross Post - Harness Bar Question
#1
Rennlist Member
Thread Starter
Cross Post - Harness Bar Question
Although I am looking for some data to back up, I am curious about some opinions from the 964 crowd:
Harness Bar Question
I have not had a chance to contact Weltmeister on their position.
Harness Bar Question
I have not had a chance to contact Weltmeister on their position.
#2
Addict
Rennlist Member
Rennlist Member
I'd agree with John Hajny's comments in your linked thread:
While the stock 3-pt belts use the same mounting points as the harness bar, the stress is also shared with the lower attachment. I think your current setup is the ticket: Brey Krause bar with shoulder harnesses clipped to rear eye bolts. The BK bar is a well-made product and the belt guides are a nice upgrade.
I'm not overly enthused with any belt bar that relies solely on the b-pillar for mounting.
Last edited by joey bagadonuts; 08-27-2009 at 02:57 PM.
#3
Rennlist Member
Thread Starter
I should point out that I see nothing wrong with using the Weltmeister bar as a harness guide bar, with the harness belts attached elsewhere. The bar has loops for positioning the shoulder straps, same as the B-K bar.