Notices
964 Forum 1989-1994
Sponsored by:
Sponsored by:

Oil Line Question

Thread Tools
 
Search this Thread
 
Old 03-17-2007, 11:20 PM
  #1  
DarrylC
Intermediate
Thread Starter
 
DarrylC's Avatar
 
Join Date: Jun 2002
Location: Charlotte, NC
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default Oil Line Question

I have seen this topic posted a few times but I do not know if I have seen an definate answer. I am replacing the oil lines that run from the thermostat to the Oil Cooler and I neglected to take some pictures of the old lines before I removed them. I have read that the normal diagrams of this part sometimes show the connection of the hoses backward from the way they should be installed. I have read that the inside line from the thermostat (I am assuming the one highest up on the car) connects with the outermost spigot on the oil cooler (the one that is closest to the tire). Is this correct???
Old 03-18-2007, 09:17 AM
  #2  
Geoffrey
Nordschleife Master
 
Geoffrey's Avatar
 
Join Date: Dec 2001
Location: Kingston, NY
Posts: 8,305
Likes: 0
Received 12 Likes on 10 Posts
Default

You should have 1 long hose 7" or so and 1 short hose 3" or so. The long hose connects the rear most (towards the tire) spigot on the thermostat with the rear most spigot on the oil tank. The short hose connects the front two. Be aware that there are 2 different front hoses depending on which model thermostat you have, one looks like an 'S' and the other is just bent in a shallow radius. Make sure you have the correct on.
Old 03-18-2007, 03:37 PM
  #3  
stevepaa
Rennlist Member
 
stevepaa's Avatar
 
Join Date: Nov 2005
Location: san jose california
Posts: 1,350
Likes: 0
Received 1 Like on 1 Post
Default

From thermostat to oil cooler, there are two lines, each has a long metal tube and then a reinforced rubber section. There is no way to get them mixed up. The inner, lower pipe is the shorter and goes on first. The outer, upper, longer hose goes on second. If you switch, the incorrect tube does not have enough bend to get around the forward jack point.
Old 03-18-2007, 11:59 PM
  #4  
stevepaa
Rennlist Member
 
stevepaa's Avatar
 
Join Date: Nov 2005
Location: san jose california
Posts: 1,350
Likes: 0
Received 1 Like on 1 Post
Default pics

here

Last edited by stevepaa; 03-04-2013 at 12:59 AM.
Old 03-20-2007, 10:17 AM
  #5  
drisin80
Instructor
 
drisin80's Avatar
 
Join Date: Jul 2006
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Default

hi-- just a comment-- that has to be the cleanest oil thermostat i have ever seen. what did you do to get all of your car soooo clean???? tom
Old 03-20-2007, 11:55 AM
  #6  
stevepaa
Rennlist Member
 
stevepaa's Avatar
 
Join Date: Nov 2005
Location: san jose california
Posts: 1,350
Likes: 0
Received 1 Like on 1 Post
Default

simple green. I had the same comment after someone posted their pics. I went out and bought it and it works wonders. I will be doing the entire underbody soon. car has 180 k on it. It is my daily driver.
Old 03-20-2007, 12:15 PM
  #7  
Steven C.
Rennlist Member
 
Steven C.'s Avatar
 
Join Date: Aug 2005
Location: TEXAS
Posts: 2,174
Received 64 Likes on 32 Posts
Default

Just a word of caution on Simple Green. It contains a mild acid. I used it for years on the fender wells on one of my cars and after a while the shinny paint became cloudy and dull. I would not use it on a regular basis but for a one time clean up it is great.
Old 03-20-2007, 01:10 PM
  #8  
stevepaa
Rennlist Member
 
stevepaa's Avatar
 
Join Date: Nov 2005
Location: san jose california
Posts: 1,350
Likes: 0
Received 1 Like on 1 Post
Default

Thanks. After the simple green I'll use a mild soap to keep it clean.



Quick Reply: Oil Line Question



All times are GMT -3. The time now is 01:35 AM.