The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
The following 2 users liked this post by spartansix:
dukmon (09-16-2019),
SR20Fastback (09-16-2019)
#3872
The 993 uses either the 964 part or the WB uses a maximum of 22mm none adjustable. I am running RS adjustable bars. I could use the turbo front bar but it would be a smaller dia.
This is a great deal. The tires appear to be from 2016 so still good and the center caps are proper for the 964 and NLA from Porsche.
I sold a set like this not long ago with the hub caps and no tires for $4200. You can always touch up the missing red paint on the center caps.
This is a great deal. The tires appear to be from 2016 so still good and the center caps are proper for the 964 and NLA from Porsche.
I sold a set like this not long ago with the hub caps and no tires for $4200. You can always touch up the missing red paint on the center caps.
Thanks Anthony! Yes, tires were put on when I bought the car in February of 2017, so they have about 2.5 years worth of use. I had no idea the colored center caps were NLA, maybe I shouldn't be selling these!
#3873
Are we talking about your narrow 964 or your wide car? If narrow: you're running a 993 front end, wouldn't a 993 RS bar fit and eliminate the need for spacers? If not, does the 993 use spacers from the factory?
#3874
It was worth the consideration. Thx.
#3875
The wide car. I am using the 993 parts on a 964 WB using the outboard settings up front and narrow trailing arms similar to the 3.8RS setup in the rear. I am not as well versed in 993 suspension although it is my understanding all the 993 variants including the turbo used the inboard settings and therefore won't help. There have been some adjustable sway bars for WB settings made over the years although I don't see anything but NB applications currently.
#3876
FS: New 964 RS LWFW, ring gear, and guide tube
I have left overs from my overhaul job...
New RS LWFW
https://www.rauchandspiegel.com/prod...ro-rs-version/
New ring gear
https://www.autohausaz.com/pn/96411414331
New RS guide tube.
https://www.rauchandspiegel.com/prod...-guide-tube-8/
Here are the lowest prices I could find googling...
FW $470 @ FCP
Ring gear $145 @ Autohauz
Guide tube $89 @ Autohauz
Total: $704
Discount @ 15% ~$100
$600 shipped
Sold
New RS LWFW
https://www.rauchandspiegel.com/prod...ro-rs-version/
New ring gear
https://www.autohausaz.com/pn/96411414331
New RS guide tube.
https://www.rauchandspiegel.com/prod...-guide-tube-8/
Here are the lowest prices I could find googling...
FW $470 @ FCP
Ring gear $145 @ Autohauz
Guide tube $89 @ Autohauz
Total: $704
Discount @ 15% ~$100
$600 shipped
Sold
Last edited by samurai_k; 09-21-2019 at 09:01 PM.
#3877
WTB: Seats, calipers, and more
Hi all —
Working on a newly acquired 964 and looking for the following:
(1) Set of black sport seats, 4 way ok. But preferably 8 way and/or heated
(2) Set of rear seats in black
(3) Pair of rear 993 NB calipers
(4) Black sunvisors for coupe
(5) Stock secondary muffler
(6) Airbox lid (light drilling ok)
Please PM if you have any of the above. Thanks!
Working on a newly acquired 964 and looking for the following:
(1) Set of black sport seats, 4 way ok. But preferably 8 way and/or heated
(2) Set of rear seats in black
(3) Pair of rear 993 NB calipers
(4) Black sunvisors for coupe
(5) Stock secondary muffler
(6) Airbox lid (light drilling ok)
Please PM if you have any of the above. Thanks!
Last edited by TxnBluDvl; 09-23-2019 at 10:25 AM.
#3879
Lemme bump that. Need the shelf space.
Front suspension upgrade: 993 setup for the front of your 964.
Front control arms, balljoints, uprights (NOT 993 RS) and calipers.
All used and in good condition. One front caliper has marks where a ham fisted mechanicc pulled the seals out, but they do not impair function and are not visible when mounted.
You'll need your hubs and new bearings.
800$ plus shipping at cost from Switzerland.
Front control arms, balljoints, uprights (NOT 993 RS) and calipers.
All used and in good condition. One front caliper has marks where a ham fisted mechanicc pulled the seals out, but they do not impair function and are not visible when mounted.
You'll need your hubs and new bearings.
800$ plus shipping at cost from Switzerland.
#3880
X-post.... have a few things listed in the 993 for sale by members thread.
https://rennlist.com/forums/993-foru...prices-12.html
See below.
993 Turbo twist Wheels and tires- $700
Front: 993 362 134 06 7.5Jx18 ET50
Rear: 993 362 140 04 10Jx18 ET65
97-98 Airbox- $100
Brake calipers: $700 for the set of 4
Rear shelf- has aftermarket speakers- $300
Suspension-stock springs and Bilstein B6 Coilovers fronts are newer- $500 with springs
993 Gillet Headers- $600
993 Wheel carriers- $500
993 leather seats- $1000
97 V-ram, fuel rails, harness and ECU- $3800
https://rennlist.com/forums/993-foru...prices-12.html
See below.
993 Turbo twist Wheels and tires- $700
Front: 993 362 134 06 7.5Jx18 ET50
Rear: 993 362 140 04 10Jx18 ET65
97-98 Airbox- $100
Brake calipers: $700 for the set of 4
Rear shelf- has aftermarket speakers- $300
Suspension-stock springs and Bilstein B6 Coilovers fronts are newer- $500 with springs
993 Gillet Headers- $600
993 Wheel carriers- $500
993 leather seats- $1000
97 V-ram, fuel rails, harness and ECU- $3800
The following users liked this post:
Wi29 (10-14-2019)
#3882
Selling a non air bag black wheel in excellent condition with optional spacer asking 395, A set of D90's with new tires in good condition for $600,
Also have a set of good condition Fuchs with tires, a CDR24 Radio and various other parts
Also have a set of good condition Fuchs with tires, a CDR24 Radio and various other parts
#3883
While we're at it, I updated my big garage cleaning list-
https://rennlist.com/forums/market/1110197
https://rennlist.com/forums/market/1110197
#3884
Front suspension upgrade: 993 setup for the front of your 964.
Front control arms, balljoints, uprights (NOT 993 RS) and calipers.
All used and in good condition. One front caliper has marks where a ham fisted mechanicc pulled the seals out, but they do not impair function and are not visible when mounted.
You'll need your hubs and new bearings.
800$ plus shipping at cost from Switzerland.
Front control arms, balljoints, uprights (NOT 993 RS) and calipers.
All used and in good condition. One front caliper has marks where a ham fisted mechanicc pulled the seals out, but they do not impair function and are not visible when mounted.
You'll need your hubs and new bearings.
800$ plus shipping at cost from Switzerland.
#3885
^^ there are slight changes to the control arms of the 993 vs the 964. IIRC they are setup for the 993 ball joint that uses a slightly different bolt and have a slightly different shape which I believe allows more caster adjustment but don't hold me to it.. Bill V would know best. The longitudinals make a difference and push out the front 12.5mm per side. The uprights are aluminum and save about 4 pounds per corner and offer radial vs axial mounting allowing the use of 993 or Big red/black caliper mounting without the adaptors. Pros and cons. Aluminum transfers vibrations as cast iron dampens them. Some say that it may impact bearing life more but I don't see that as a problem for most street applications.