The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
#2058
I have some stuff to get rid of:
1) Shocks, original Porsche, 75k miles. Condition ok. Rubber dust cover no to so good
2) Swaybar front, bushings, both used 75k
3) Swaybar rear, bushings, both used 75k
4) Brakelines, OEM, used 75k. No leaks. just switched to Steelbraided
I am leaving the country for good in 2 months and I cant take the stuff with me. So if someone needs it - prices are loooooow
Pictures coming in the next days.
1) Shocks, original Porsche, 75k miles. Condition ok. Rubber dust cover no to so good
2) Swaybar front, bushings, both used 75k
3) Swaybar rear, bushings, both used 75k
4) Brakelines, OEM, used 75k. No leaks. just switched to Steelbraided
I am leaving the country for good in 2 months and I cant take the stuff with me. So if someone needs it - prices are loooooow
Pictures coming in the next days.
#2059
I have a GOOD CCU up for grabs if anyone is interested. It works 100%, even the oil cooler fans.
993James993, you'll then have your buttons from the person who might purchase the GOOD CCU I have.
CCU SOLD, turns out the one I had boxed up was my original...the oil cooler fan relay does not operate.
If anyone has a good contact/info. regarding who may be able to fix the oil cooler fan circuitry in a CCU please PM me or feel free to post to the list, it's been awhile since I've seen information regarding who fixes these at a reasonable rate.
993James993, you'll then have your buttons from the person who might purchase the GOOD CCU I have.
CCU SOLD, turns out the one I had boxed up was my original...the oil cooler fan relay does not operate.
If anyone has a good contact/info. regarding who may be able to fix the oil cooler fan circuitry in a CCU please PM me or feel free to post to the list, it's been awhile since I've seen information regarding who fixes these at a reasonable rate.
Last edited by Jeff Curtis; 01-30-2012 at 12:57 AM.
#2060
FWIW, I still have all the rear bumper plastic pieces, I'll call them "track quality", they're not cracked, just need repainted to your color and BAM, well, hopefully NOT BAM...anyway, they'll look great.
Here's a few more pics of what I have left...again, still a lot left but here goes:
1 - factory rocker panel with matching sail panel - for passenger (Right) side, in GP White with satin black lower section - great condition...will include clips if needed.
2 - rear heat shields...I have 1.5 sets of the side pieces and 2 center sections - these are VERY pricey from Porsche, but very reasonable from me.
3 - a pair of red sail panels, you will probably want to repaint them, paint is OK, panels are in GREAT condition.
4 - Factory Original signal light set, LEFT side...I think?
5 - Factory foglight housings and reflectors...my lenses were trashed, but here's one with a rock chip in it...cheap!!
Here's a few more pics of what I have left...again, still a lot left but here goes:
1 - factory rocker panel with matching sail panel - for passenger (Right) side, in GP White with satin black lower section - great condition...will include clips if needed.
2 - rear heat shields...I have 1.5 sets of the side pieces and 2 center sections - these are VERY pricey from Porsche, but very reasonable from me.
3 - a pair of red sail panels, you will probably want to repaint them, paint is OK, panels are in GREAT condition.
4 - Factory Original signal light set, LEFT side...I think?
5 - Factory foglight housings and reflectors...my lenses were trashed, but here's one with a rock chip in it...cheap!!
#2062
All, I'm leaving for Sebring in about two hours, so I'll be "off the grid" for awhile but do sport an iPhone so can answer PMs/emails while down there.
IF you need anything brought down to Sebring that you could use, by all means, let me know ASAP.
IF you need anything brought down to Sebring that you could use, by all means, let me know ASAP.
#2063
In cleaning out my garage I came across this conical intake I bought a few years back. It was new and I never installed it. It was clearly listed as a 964 compatible part. Foam filter included. Very aftermarket, but it's made fine. I have all the parts, but never did get any instructions to go with it. Bought on eBay. I can't even find any records of the price I paid for it. So, I'm okay to part with it for $20 plus the cost of shipping. Any interest?
#2065
Laker's Garage Sale
**SOLD**Luk DMF (DMF013) new in box - $600 shipped to the lower 48 states**SOLD*
**SOLD**Sachs Clutch Kit (KF793-01) new in box - $400 shipped to the lower 48 states**SOLD*
**SOLD**Beru Wireset new in box - $325 shipped to the lower 48 states **SOLD**
*20mm rear sway bar 964.333.701.06, with bushings, 37k miles. Bushings are 20 years old and look fine, but probably should be replaced. It would benefit 89 & 90 C4s (reduce understeer) and 90 C2s (reduce oversteer) which have the stock rear sway bar. Used and dirty. $75 shipped to the lower 48 states.
**SOLD**Sachs Clutch Kit (KF793-01) new in box - $400 shipped to the lower 48 states**SOLD*
**SOLD**Beru Wireset new in box - $325 shipped to the lower 48 states **SOLD**
*20mm rear sway bar 964.333.701.06, with bushings, 37k miles. Bushings are 20 years old and look fine, but probably should be replaced. It would benefit 89 & 90 C4s (reduce understeer) and 90 C2s (reduce oversteer) which have the stock rear sway bar. Used and dirty. $75 shipped to the lower 48 states.
Last edited by Laker; 02-22-2012 at 01:00 AM. Reason: Beru wire set sold
#2067
I still have some 964 interior pieces left, in great condition.
Several have inquired about the rear shelf with Infinity speakers but no commitments as of yet.
I also have a pair of door panels (beige) and the quarter panel covers...all seat belt hardware as well.
I had the lower dash pad SOLD but the almost-buyer disappeared on me.
I have a new P-car "toy" in the stable as of last night, not sure it's staying...still in the negotiating process. Everything checked out great today, dyno produced some astounding #s - just have to hammer out a final price.
Several have inquired about the rear shelf with Infinity speakers but no commitments as of yet.
I also have a pair of door panels (beige) and the quarter panel covers...all seat belt hardware as well.
I had the lower dash pad SOLD but the almost-buyer disappeared on me.
I have a new P-car "toy" in the stable as of last night, not sure it's staying...still in the negotiating process. Everything checked out great today, dyno produced some astounding #s - just have to hammer out a final price.
#2069