1990 964 C4 CAB
05-02-2024, 10:11 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Plug
M6
Plug was very clean
Close up
Shaft flushed several times
05-02-2024, 10:15 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Gears pulled
PO didn’t believe in lock tabs
Need to polish shaft. Main gear is good. The other gears are bad.
05-02-2024, 10:18 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Other half
Ready to detail
Stomski offset spacers
05-02-2024, 10:19 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
In the parts washer
05-04-2024, 07:33 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Some degreasing
05-04-2024, 07:34 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Baked on oil
05-04-2024, 07:35 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
After a good scuffing with maroon scotch brite
05-04-2024, 07:38 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Unpolished surfaces
05-04-2024, 07:39 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Show polished surfaces vs 4 unpolished
05-04-2024, 07:41 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Polished vs unpolished IMS bearing surface
05-04-2024, 07:44 PM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Crank bearing surfaces
Close up
Ready for bearings
The following users liked this post:
05-12-2024, 03:10 AM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Stomski air tool to clean oil galleries
In action
05-12-2024, 03:11 AM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
IMS bearing
Sitting proud
05-12-2024, 03:13 AM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Tapped down
05-12-2024, 03:14 AM
Rennlist Member
Thread Starter
Join Date: May 2023
Posts: 220
Oiled
Engine oil
The following users liked this post:
