Rennlist - Porsche Discussion Forums

Rennlist - Porsche Discussion Forums (
-   964 Forum (
-   -   Rear Reflector Rehab (

964Andrew 09-04-2018 04:38 PM

Rear Reflector Rehab
This thread is a continuation of the monster "Rear Center Light Substitution Panel" Thread ( and will primarily focus on the rehabilitation of existing (salvageable) panels and building a complete new-design plug-n-play panel replacement. Although the previous panels are not available anymore, I can still provide help with parts, wiring and setup. STL files are available upon request.

Let's start. Here is where I am right now. The panel is sealed and painted. Hardware TBD.


dukmon 09-04-2018 06:04 PM


964Andrew 09-04-2018 11:23 PM


964Andrew 09-30-2018 12:35 AM

Just thinking out loud. What do you guys think?


jonathant 09-30-2018 01:18 PM

Which one
personally I like the finer grained screen better. Itís business-like but subtle; as with the 964 NB itself. OTOH for an outlaw or a flash widebody the bigger vents would work.

MrRoboto 09-30-2018 04:47 PM

Just got through the original thread. Andrew, you are a Craftsman in the finest sense of the word. Unfortunately, I do not have a 964, but that did not prevent me from sharing in the excitement with all of you as I went through all 40 pages of the original thread. What a product! So, my question is, is there any chance something like this will be made available for a 993? Please????

964Andrew 10-01-2018 12:16 AM

Thank you for the kind words. It was and still is a fun project for me. Time allowing I would like to do more of projects like that. 993 would be easy conversion as well, just need to get my hands on a reflector and measure everything underneath.


Silvertarga 10-25-2018 01:21 PM

Andrews panel on my 964

Silvertarga 10-25-2018 01:23 PM
Andrew sent a silver and black, easily changed but I went for the more stealth look

salty87 10-25-2018 02:40 PM

Originally Posted by Silvertarga (Post 15385880)
Andrew sent a silver and black, easily changed but I went for the more stealth look

^Nice! Hope you don't mind if I borrow that idea. I have a spare badge.

Did you do anything to tidy up the 'stuff' that was left after removing the OEM light piece? There's some sort of aluminum flashing.

Silvertarga 10-25-2018 02:44 PM

This is a mesh screen installed over the old light piece after the lens is removed from it , that aluminum flashing is heat shielding (debateable if it works or not as heat causes many issues with the center reflector)
all I had to do was install the mesh on the old light box , and refit it to car

Thanks and dont forget to post pics of the final product.

964Andrew 10-26-2018 01:38 AM

Still working out the kinks of the prototype. Getting designs ready for laser cutting, also - I think I'm close on the hardware. I really like how the flush bolts sit in the frame. Let me know what you think.


Deserion 10-26-2018 02:29 AM

Originally Posted by 964Andrew (Post 15387456)
I really like how the flush bolts sit in the frame. Let me know what you think.


dukmon 10-26-2018 09:24 AM

Hardware looks good.

Silvertarga 10-26-2018 12:20 PM

I like it, looks like a shell casing, almost a 45-70

All times are GMT -3. The time now is 07:38 AM.

© 2019 MH Sub I, LLC dba Internet Brands