US source for this front splitter?
#1
Super Guru
Rennlist Member
Rennlist Member
Thread Starter
US source for this front splitter?
Does anyone know of a US source for a front splitter like this?
http://www.albertweb.de/Porsche/Karo...erlippe964.jpg
I'd rather not go through the import hassle if I can avoid it.
Thanks
http://www.albertweb.de/Porsche/Karo...erlippe964.jpg
I'd rather not go through the import hassle if I can avoid it.
Thanks
#3
Registered User
i got one of them from albert in germany .
pretty sure they have a usa distributor .
fibre-glass , and not sure on the fit .......... if you wanna wait 'til i have attempted fitting mine , maybe it will save you money
pretty sure they have a usa distributor .
fibre-glass , and not sure on the fit .......... if you wanna wait 'til i have attempted fitting mine , maybe it will save you money
#4
Super Guru
Rennlist Member
Rennlist Member
Thread Starter
Originally posted by ian c - u.k
i got one of them from albert in germany .
pretty sure they have a usa distributor .
fibre-glass , and not sure on the fit .......... if you wanna wait 'til i have attempted fitting mine , maybe it will save you money
i got one of them from albert in germany .
pretty sure they have a usa distributor .
fibre-glass , and not sure on the fit .......... if you wanna wait 'til i have attempted fitting mine , maybe it will save you money
Regards
#5
Registered User
it looks ok , just a bit concerned about how it overlaps the bumper at the front middle
will have to trial fit once its painted , my cars black , so it might not look too bad
will have to trial fit once its painted , my cars black , so it might not look too bad
#6
Instructor
Join Date: Nov 2002
Location: Pennsylvania
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Ian,
Any idea how to find or contact the US distributor. I'm also interested inhow it fits, but have wanted one of these for a while.
Gordon
(ps, love the sig... wasted some $$$ myself )
Any idea how to find or contact the US distributor. I'm also interested inhow it fits, but have wanted one of these for a while.
Gordon
(ps, love the sig... wasted some $$$ myself )
#7
Technical Specialist
Rennlist
Lifetime Member
Rennlist
Lifetime Member
FVD and Cargraphic carry something like that. A bit more subtle, Techart or Porsche Tequipment, carry splitters that replace the front black plastic panels.
Trending Topics
#8
Bill:
I have been trying to locate those splitters, but no one seems to have a part number...do you happen to have one?
Another great look is the Turbo S splitter. Subtle but to the point.
You need to purchase the 965 Turbo S front undertrays, remove the splitter (drill out pop rivets and loosen glue seam and glue/pop rivet the splitter lip onto your existing under trays. This is a great look.
Regards all!
marc
I have been trying to locate those splitters, but no one seems to have a part number...do you happen to have one?
Another great look is the Turbo S splitter. Subtle but to the point.
You need to purchase the 965 Turbo S front undertrays, remove the splitter (drill out pop rivets and loosen glue seam and glue/pop rivet the splitter lip onto your existing under trays. This is a great look.
Regards all!
marc
#9
Rennlist Member
Its not the best picture but but here is a view of the 935 splitter.
#10
Burning Brakes
Join Date: May 2003
Location: N. OC, CA
Posts: 1,060
Likes: 0
Received 0 Likes
on
0 Posts
I've been looking for them also and have found that RennSpeed has one that look similar. They call them 964 3.8 RS Two Piece Splitters. Here's the link http://www.rennspd.com/P_Detail.asp?PID=431. I'll be picking up some clear lens from them ($80/pair, what a deal!) and will also be checking out the quality and fit of those splitters. I can report back if someone is interested.
#11
Super Guru
Rennlist Member
Rennlist Member
Thread Starter
Originally posted by cobalt
Its not the best picture but but here is a view of the 935 splitter.
Its not the best picture but but here is a view of the 935 splitter.
Thanks for posting
#12
Rennlist Member
Originally posted by Ruairidh
I like the look of this. Is it one piece? Do you know if it only fits widebodies?
I like the look of this. Is it one piece? Do you know if it only fits widebodies?
#13
Registered User
this looks like the one albert has copied .
they also sell ones for wide-bodied cars .
i was thinking , as soon as i do some parking damage to the fibre-glass , i'll change to a techart one , but the advice on the genuine one sounds better .
the albert one bolts/bonds to underneath the bumper all the way round , apart from the front , where it lips over the bumper .
this is my area of concern , but maybe i can fill will black sikaflex sealer , as my car is black .
it could be blended in to the bumper , but with it being a glassfibre part so close to the floor/curs/speedbumps etc. maybe this would make the spoiler too permanent !!
will dig out the address for albert motorsports website , as i said , pretty sure it mentions a usa disributor somewhere
they also sell ones for wide-bodied cars .
i was thinking , as soon as i do some parking damage to the fibre-glass , i'll change to a techart one , but the advice on the genuine one sounds better .
the albert one bolts/bonds to underneath the bumper all the way round , apart from the front , where it lips over the bumper .
this is my area of concern , but maybe i can fill will black sikaflex sealer , as my car is black .
it could be blended in to the bumper , but with it being a glassfibre part so close to the floor/curs/speedbumps etc. maybe this would make the spoiler too permanent !!
will dig out the address for albert motorsports website , as i said , pretty sure it mentions a usa disributor somewhere
#14
Addict
Rennlist Member
Rennlist Member
Here's the information on Cargraphic USA:
Cutting Edge Automotive Tech
653 Sayre Ave Perth Amboy NJ 08861
Tel.: 7328261002 • Fax: 7328264706
Email: cargraphicUSA@aol.com
Web: www.cargraphic.com
It won't be cheap but very cool.
I'm sure By Design in LA could also take care of your order. They feature both Cargraphic and Techart products.
Cutting Edge Automotive Tech
653 Sayre Ave Perth Amboy NJ 08861
Tel.: 7328261002 • Fax: 7328264706
Email: cargraphicUSA@aol.com
Web: www.cargraphic.com
It won't be cheap but very cool.
I'm sure By Design in LA could also take care of your order. They feature both Cargraphic and Techart products.
#15
Super Guru
Rennlist Member
Rennlist Member
Thread Starter
Originally posted by PC2
I've been looking for them also and have found that RennSpeed has one that look similar. They call them 964 3.8 RS Two Piece Splitters. Here's the link http://www.rennspd.com/P_Detail.asp?PID=431. I'll be picking up some clear lens from them ($80/pair, what a deal!) and will also be checking out the quality and fit of those splitters. I can report back if someone is interested.
I've been looking for them also and have found that RennSpeed has one that look similar. They call them 964 3.8 RS Two Piece Splitters. Here's the link http://www.rennspd.com/P_Detail.asp?PID=431. I'll be picking up some clear lens from them ($80/pair, what a deal!) and will also be checking out the quality and fit of those splitters. I can report back if someone is interested.